Online Access Free 070-337 Practice Test

You have a Lync Server 2013 infrastructure. You have one Enterprise Edition pool named pool1. contoso.com. Enterprise Voice is enabled for all users. You have a PSTN gateway named mg1.contoso. com that does not support secure signaling. The Encryption support level of the global trunk configuration is set to Not Supported. You add a second PSTN gateway named mg2.contoso.com. The SIP General parameters for mg2.contoso.com are configured as shown in the following table.

On mg2.contoso.com, you generate and install a certificate from an internal certification authority (CA). You need to ensure that Lync Server 2013 can use both PSTN gateways to make calls on the PSTN. Which four actions should you perform? To answer, move the four appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Correct Answer:

Explanation:
When defining a PSTN gateway in Topology Builder, you must define a root trunk to successfully add the
PSTN gateway to your topology.
The root trunk cannot be removed until the associated PSTN gateway is removed.

You are evaluating the planned changes for the contractors. You need ensure that the contractors can access Outlook Voice Access and receive voice mails from callers. Which cmdlet should you run?

• A.New-CsSipDomain
• B.New-CsExUmContact
• C.New-CsSipProxyCustom
• D.New-CsVoicemailReroutingConfiguration

You need to identify which tasks can be performed by users who have the Response Group Administrator role and the Response Group Manager role. Which tasks should you identify? To answer, select the appropriate tasks for each role in the answer area.
Hot Area:

Correct Answer:

Explanation:
Lync Server 2013 introduces a new Response Group Manager role. Now there are two management roles for response groups: Response Group Manager and Response Group Administrator. While Response Group Administrators can still configure any element for any response group, Managers can configure only certain elements, only for response groups they own. This improvement in the administration model benefits Response Group scalability, especially for large deployment scenarios.

You have a Lync Server 2013 infrastructure. Your network contains a single site. The site contains a Standard Edition server and multiple network segments. Each segment is associated to a different subnet. Some of the network segments are wireless and some are wired. You enable Enterprise voice and deploy a Lync Server 2013 media gateway. You configure media bypass. You set media bypass to Always bypass. Call Admission Control (CAC) is disabled. Users on the wireless network report poor audio quality during calls to external phone numbers. The users report good audio quality during calls to other Lync Server 2013 users. You need to recommend changes to the infrastructure to improve the audio quality of calls for the wireless network users. Which three actions should you recommend? (Each correct answer presents part of the solution.

• A.From the Microsoft Lync Server 2013 Control Panel, select Enable bypass for non-mapped sites.
• B.Associate the wired subnets to the new site.
• C.From the Microsoft Lync Server 2013 Control Panel, select Use sites and region configuration.
• D.Associate the wireless subnets to the new site.
• E.Create a new network site.
• F.From the Microsoft Lync Server 2013 Control Panel, select Enable call admission control.

You have a Lync Server 2013 infrastructure. You plan to configure Exchange Online to host voice mail. You need to identify where to perform the following actions:
Configure the hosted voice mail policy.
Set the external access number for the voice mail.
Enable a user for Unified Messaging (UM).
Configure the Contact object used for the hosted voice mail.
Define a Unified Messaging (UM) IP gateway.
Which environment should you identify for each action? To answer, select the appropriate environment for each task in the answer area.
Hot Area:

Correct Answer:

Explanation:
http://technet.microsoft.com/en-us/library/gg398932.aspx
Lync Server 2010 on-premises supports interoperability with Exchange Online in the following ways:
Calendar data and Out of Office messages
Instant Messaging (IM) and presence interoperability in Outlook Web App
Voice mail interoperability