Free Access CheckPoint.156-915.80.v2022-05-03.q219 Practice Test (Page 31)

Question 146

Fill in the blank. To save your OSPF configuration in GAiA, enter the command ___________ .

Question 147

When a packet is flowing through the security gateway, which one of the following is a valid inspection path?

A.Acceleration Path

B.Firewall Path

C.Medium Path

D.Small Path

Question 148

Your perimeter Security Gateway's external IP is 200.200.200.3. Your network diagram shows:

Required: Allow only network 192.168.10.0 and 192.168.20.0 to go out to the Internet, using
200.200.200.5.
The local network 192.168.1.0/24 needs to use 200.200.200.3 to go out to the Internet.
Assuming you enable all the settings in the NAT page of Global Properties, how could you achieve these requirements?

A.Create two network objects: 192.168.10.0/24 and 192.168.20.0/24. Add the two network objects to a group object. Create a manual NAT rule like the following: Original source - group object; Destination - any; Service - any; Translated source - 200.200.200.5; Destination - original; Service - original.

B.Create network objects for 192.168.10.0/24 and 192.168.20.0/24. Enable Hide NAT on both network objects, using 200.200.200.5 as hiding IP address. Add an ARP entry for 200.200.200.3 for the MAC address of 200.200.200.5.

C.Create an Address Range object, starting from 192.168.10.1 to 192.168.20.254. Enable Hide NAT on the NAT page of the address range object. Enter Hiding IP address 200.200.200.5. Add an ARP entry for
200.200.200.5 for the MAC address of 200.200.200.3.

D.Create a network object 192.168.0.0/16. Enable Hide NAT on the NAT page. Enter 200.200.200.5 as the hiding IP address. Add an ARP entry for 200.200.200.5 for the MAC address of 200.200.200.3.

Question 149

What's true about Troubleshooting option in the IPS profile properties?

A.Temporarily change the active protection profile to "Default_Protection"

B.Temporarily set all protections to track (log) in SmartView Tracker

C.Temporarily will disable IPS kernel engine

D.Temporarily set all active protections to Detect

Question 150

Match the following commands to their correct function.

Each command has one function only listed.

A.C1>F2; C2>F4; C3>F1; C4>F5

B.C1>F2; C2>F1; C3>F6; C4>F4

C.C1>F6; C2>F4; C3>F2; C4>F5

D.C1>F4; C2>F6; C3>F3; C4>F2

Latest Upload: 105OCEG.GRCP.v2025-09-11.q211; 104HP.HPE0-V27.v2025-09-11.q78; 118Oracle.1Z0-1057-23.v2025-09-10.q47; 150Google.Professional-Cloud-Network-Engineer.v2025-09-09.q179; 131SAP.C-S4EWM-2023.v2025-09-08.q83; 164TheSecOpsGroup.CNSP.v2025-09-08.q20; 223CFAInstitute.ESG-Investing.v2025-09-08.q173; 158PECB.ISO-IEC-27001-Lead-Implementer.v2025-09-06.q132; 148Salesforce.Data-Architect.v2025-09-05.q216; 143Adobe.AD0-E605.v2025-09-05.q50

Question 146

Question 147

Question 148

Question 149

Question 150

Download PDF File