FLAGS Indicates the status of each underlying interface,which can be one or any combination of the following:
(D)
d indicates that the interface is down and therefore unusable.
(E)
M indicates that the interface is designated by the system to send and receive IPv6 multicast traffic for the IPMP group.
Note:
i indicates that the INACTIVE flag is set for the interface. Therefore,the interface is not
used to send or receive data traffic.
s indicates that the interface is configured to be a standby interface.
m indicates that the interface is designated by the system to send and receive IPv4
multicast traffic for the IPMP group.
b indicates that the interface is designated by the system to receive broadcast traffic for the
IPMP group.
h indicates that the interface shares a duplicate physical hardware address with another
interface and has been taken offline. The h flag indicates that the interface is unusable.

The coreadm command is used to specify the name and location of core files produced by abnormally-terminating processes.

Explanation/Reference:
Explanation:
Solaris 11 Express makes it pretty easy to set up a local copy of the repository.
A common reason folks need access to a local repository is because their system is not connected to the Internet.
Tthe pkg set-publisher command can be used to for example add a publisher or to enable or disable a publisher.
Note: Example Adding a Publisher
Use the -g option to specify the publisher origin URI.
# pkg set-publisher -g http://pkg.example.com/release example.com
Example Specifying the Preferred Publisher
Use the -P option to specify a publisher as the preferred publisher. The specified publisher moves to the top of the search order. You can specify the -P option when you add a publisher or you can modify an existing publisher.
# pkg set-publisher -P example.com
Example Enabling or Disabling a Publisher
Use the -d option to disable a publisher. The preferred publisher cannot be disabled. A disabled publisher is not used in package operations such as list and install. You can modify the properties of a disabled publishers.
Use the -e option to enable a publisher.
# pkg set-publisher -d example2.com

This example shows how to display the default root crontab file.
$ suPassword:
# crontab -l
# ident "@(#)root 1.19 98/07/06 SMI" /* SVr4.0 1.1.3.1 */
#
# The root crontab should be used to perform accounting data collection.
#
#
1 0 3 * * * /usr/sbin/logadm
1 5 3 * * 0 /usr/lib/fs/nfs/nfsfind
3 0 3 * * * [ -x /usr/lib/gss/gsscred_clean ] && /usr/lib/gss/gsscred_clean
# 10 3 * * * /usr/lib/krb5/kprop_script ___slave_kdcs___

'ipadm show-addr' displays all the configured addresses on the system.
Example: # ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 lo0/v6 static ok ::1/128