Online Access Free 1z0-429 Practice Test

Identify the FS1 feature that migrates data between storage tiers based on workload.

• A.Port Masking
• B.QoS Plus (Auto-Tiering)
• C.System Locality Information Table (SLIT)
• D.Quality of Service (QoS)

Which statement is true about Performance and Capacity SSDs being intermixed on the same Drive Enclosure?

• A.You cannot mix SSD types within a Drive Enclosure. All SSDs within a DE must be the same type.
• B.SSDs require different carriers than those that they are shipped with. When adding different types of SSD in a DE, you must exchange the drive carrier with the extra drive carrier that is included in the kit.
• C.You can assign different types of disks to different disk groups. SSDs within a disk group can be of adifferenttype.
• D.You need to assign different types of disks to different disk groups, SSDs within a disk group must be of the same type.

Which is the maximum tilt angle of the FS1-2 system when the components are on the uphill side of the track?

• A.36 degrees
• B.24 degrees
• C.48 degrees
• D.12 degrees

The storage administrator would like to change the load-balancing settings for a volume assigned to a host. Identify two options that explain how this is accomplished.

• A.Navigate to the SAN/LUNs and double-click the LUN to modify.
• B.Go to the Data Protection tab and change the Load Balancing option for the specific LUN.
• C.Navigate to the SAN/Hosts and double-click the host to modify.
• D.Navigate to the System/Storage Profiles and double-click the profile to modify.
• E.Go to the Oracle FS Path Manager tab and change the Load Balancing option for the specific LUN.

Which two are recommended locations for Pilots and Controllers?

• A.Pilot 1 in RU 23, Pilot 2 in RU 24
• B.Controller 1 in RU 23 and 24, Controller 2 in RU 25 and 26
• C.Pilot 1 in RU 21, Pilot 2 in RU 22
• D.Controller 1 in RU 19 and 20, Controller 2 in RU 21 and 22