Online Access Free 1z1-499 Practice Test

Which feature must be enabled to secure communications between a ZFS Storage Appliance and a LDAP server?

• A.SSL/TLS
• B.Simple Configuration
• C.SSH
• D.SASL/DIGEST-MD5

A storage administrator has completed initial configuration and is going to access the BUI.
What should you do to access the BUI?

• A.Direct your browser to the system by using the IP address you assigned to the NET-0 port during initial configuration as follows: https://ipaddress:225.
• B.Direct your browser to the system by using the IP address you assigned to the NET-0 port during initial configuration as follows: https://ipaddress:215.
• C.Direct your browser to the system by using the IP address you assigned to the NET-1 port during initial configuration as follows: http://ipaddress:215.
• D.Direct your browser to the system by using the IP address you assigned to the NET-1 port during initial configuration as follows: https://ipaddress:215.

Which hardware failure cannot be prevented by the No Single Point of Failure feature on a ZFS Storage Appliance?

• A.disk backplane failure
• B.power supply failure
• C.controller failure
• D.JBOC failure

Which type of devices can be tuned using the synchronous write bias properly by selecting values of either latency or throughput?

• A.cache devices
• B.block devices
• C.quantum devices
• D.log devices

Which three statements are correct about cluster configuration of ZFS Storage Appliances?

• A.Clusters can be configured in two ways: active-active or active-passive.
• B.To use the resources of both nodes simultaneously, you need at least two storage pools: one that maps to node1 and another that maps to node2.
• C.You can assign a networking and storage pool to a controller in a cluster.
• D.In a cluster environment, both nodes can be owners of each storage pool.
• E.Only one controller in a cluster can be assigned resources.