Explanation
From the output we see the native VLAN of Switch1 on Gi0/1 interface is VLAN 1 while that of Switch2 is VLAN 99 so there would be a native VLAN mismatch.

Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/vlan/configuration_guid Untagged traffic from the device attached to the Cisco IP Phone passes through the phone unchanged, regardless of the trust state of the access port on the phone.

OSPF uses the following criteria to select the router ID:
1. Manual configuration of the router ID (via the "router-id x.x.x.x" command under OSPF router configuration mode).
2. Highest IP address on a loopback interface.
3. Highest IP address on a non-loopback and active (no shutdown) interface.

The hypervisor creates and manages virtual machines on a host computer and allocates physical system resources to them.

AAA stands for Authentication, Authorization and Accounting. + Authentication: Specify who you are (usually via login username & password) + Authorization: Specify what actions you can do, what resource you can access + Accounting: Monitor what you do, how long you do it (can be used for billing and auditing) An example of AAA is shown below: + Authentication: "I am a normal user. My username/password is user_tom/learnforever" + Authorization: "user_tom can access LearnCCNA server via HTTP and FTP" + Accounting: "user_tom accessed LearnCCNA server for 2 hours". This user only uses "show" commands.