Free Access F5.201.v2025-05-20.q131 Practice Test (Page 3)

Question 6

A BIG-IP Administrator receives an RMA replacement for a failed F5 device. The BIG-IP Administrator tries to restore a UCS taken from the previous device, but the restore fails. The following error appears inthe/var/log/itm.
mcpd [****J: ******;0; License is not operational (expired or digital signature does not match contents.) What should the BIG-IP Administrator do to avoid this error?

A.Use the appropriate tmsh command with the no-license option

B.Remove the license information from the UCS archive

C.Reactivate the license on the new device using the manual activation method

D.Revoke the license prior to restoring

Question 7

What should the BIG-IP Administrator do to apply and activate a hotfix to a BIG-IP device that is currently running version 11.0.0 on active partition HD1.1?

A.1. reactivate the license on partition HD1.1
2. apply a hotfix to partition HD1.1

B.1. set partition HD1.2 active
2. apply a hotfix to partition HD1.2

C.1. confirm that 11.0.0 is installed on inactive partition HD1.2
2. apply a hotfix to partition HD 1.2
3. activate partition HD1.2

D.1. activate partition HD1.2
2 confirm version 11.0.0 on partition HD1.2
3. install a hotfix on partition HD1.2

Question 8

Which statement is true concerning SNATs using automap?

A.A SNAT using automap can be used to translate the source address of all outgoing traffic to the same address regardless of which VLAN the traffic is sent through.

B.Only specified self-IP addresses are used as automap addresses.

C.SNATs using automap will translate all client addresses to an automap address.

D.A SNAT using automap will preferentially use a floating self-IP over a nonfloating self-IP.

Question 9

A site wishes to perform source address translation on packets arriving from the Internet for clients using some pools but not others. The determination is not based on the client's IP address, but on the pool they are load balanced to. What could best accomplish this goal.

A.A SNAT for all addresses could
be defined,
and then disable the SNAT processing for select pools.

B.For each virtual server, regardless their default load balancing pools, association with SNAT pools could vary dependent upon need.

C.The decision to perform source address translation is always based on a client's address (or network). Thus, this goal cannot be achieved.

D.The decision to perform source address translation is always based on VLAN. Thus, the goal cannot be achieved.

Question 10

Refer to the exhibit.

The BIG-IP Administrator has modified an iRule on one device of an HA pair. The BIG-IP Administrator notices there is NO traffic on the BIG-IP device in which they are logged into.
What should the BIG-IP Administrator do to verify if the iRule works correctly?

A.Push configuration from this device to the group and start to monitor traffic on this device

B.Pull configuration to this device to the cluster and start to monitor traffic on this device

C.Log in to the other device in the cluster, push configuration from it, and start to monitor traffic on that device

D.Log in to the other device in the cluster, pull configuration to it, and start to monitor traffic on that device

Other Version: 1538F5.201.v2024-11-27.q148; 1337F5.201.v2024-03-26.q135; 3665F5.201.v2022-06-13.q138; 3213F5.201.v2022-01-26.q110; 54F5.Prepawayete.201.v2021-11-05.by.carr.104q.pdf

Latest Upload: 174NAHQ.CPHQ.v2026-09-03.q481; 113SAP.C-S4CPB-2602.v2026-09-02.q7; 109Cisco.700-805.v2026-09-02.q86; 161MSSC.CLT-4.0.v2026-09-02.q43; 126Fitness.NCSF-CPT.v2026-09-02.q18; 174Google.Generative-AI-Leader.v2026-09-02.q77; 139PECB.ISO-14001-Lead-Auditor.v2026-09-01.q39; 126Google.GCP-DE.v2026-09-01.q27; 160Cisco.300-820.v2026-09-01.q105; 154Cisco.500-220.v2026-09-01.q72

Question 6

Question 7

Question 8

Question 9

Question 10

Download PDF File