Explanation
ipconfig is a command-line tool that displays the current configuration of the network interfaces on a Windows PC. It can also be used to release and renew the IP address, flush the DNS cache, and display the routing table. If the PC is unable to ping the local gateway, the technician should use ipconfig to check the IP address, subnet mask, default gateway, and DNS servers of the PC. The technician can also use ipconfig
/renew to request a new IP address from the DHCP server, or ipconfig /flushdns to clear the DNS cache.
References
*[CompTIA A+ Core 1 (220-1001) Certification Study Guide], page 78
*How to use the ipconfig command on Windows 10
*How to Ping the Windows Network Router

Explanation
A 1000W 24-pin modular power supply provides enough power to support a dual graphics card configuration, which requires a significant amount of power. A modular power supply allows the technician to connect only the cables that are necessary for the current configuration, reducing cable clutter and improving airflow inside the case. This makes it easier to install and maintain the power supply.

The correct answer is A. Bluetooth.
Bluetooth is a wireless technology that allows devices to communicate with each other over short distances. It is commonly used for connecting wireless headsets, speakers, keyboards, mice, and other peripherals to mobile phones, laptops, and other devices.
To use a Bluetooth device with a mobile phone, the user needs to enable Bluetooth on both devices and pair them together. Pairing is a process of exchanging security codes and creating a trusted connection between the devices. Once paired, the devices can automatically connect when they are in range and turned on.
If the user is experiencing an issue when trying to use a wireless headset with a mobile phone, the first thing to check is whether Bluetooth is enabled on both devices. If Bluetooth is turned off, the devices will not be able to connect or communicate with each other.
To enable Bluetooth on a mobile phone, the user can follow these steps:
*Check in quick settings: Select the Network, Sound, or Battery icons ( ) on the right side of the taskbar, look for the Bluetooth quick setting, then select Bluetooth to turn it on. You'll see "Not connected" if your Windows 11 device isn't connected to any Bluetooth accessories.
*Check in Settings: Select Start > Settings > Bluetooth & devices . Make sure Bluetooth is turned on.
These steps are based on Windows 11 operating system1. The exact steps may vary depending on the type and model of the mobile phone and its operating system.
If Bluetooth is enabled on both devices but they still cannot connect, the user can try some other troubleshooting steps, such as:
*Turn off your Bluetooth device, wait a few seconds, then turn it back on.
*Make sure your Bluetooth device is in range of your mobile phone.
*Remove the Bluetooth device from your mobile phone's list of paired devices, then add it again.
*Update the Bluetooth driver on your mobile phone or the firmware on your Bluetooth device.
*Restart your mobile phone or reset your Bluetooth device.
For more details and tips on how to fix Bluetooth problems in Windows 112 or other operating systems1, you can visit the links provided.

A Storage Area Network (SAN) is a network specifically designed to pool storage resources and make them accessible to servers as if they were locally attached drives. SANs are used in data centers for high-performance storage and retrieval of large volumes of data. This setup allows multiple networked devices to access shared storage as if it were local, which matches the scenario described. PAN (Personal Area Network), WLAN (Wireless LAN), and MAN (Metropolitan Area Network) serve different purposes and do not primarily focus on shared storage access.
References:
* CompTIA A+ Core 1 Exam Objectives Section 2.7: Compare and contrast Internet connection types, network types, and their features.