A non-volatile memory express (NVMe) solid state drive (SSD) is the best option for an end user who wants to upgrade the hard drive on a laptop and wants one that is fast and shock resistant.NVMe SSDs use flash memory and PCIe interface to achieve high performance and low latency.SSDs are also more shock resistant than hard disk drives (HDDs) because they have no moving parts.Hybrid HDD/SSD combines both technologies but does not offer the same speed or capacity as pure SSDs.A 5,400rpm HDD or a 7,200rpm HDD are slower and less shock resistant than SSDs

Explanation
The most likely issue is C. Tray settings.
Tray settings are the configuration options that tell the printer what type and size of paper is loaded in each tray. If the tray settings do not match the actual paper loaded, it can cause paper jams, misalignment, or incorrect printing. For example, if the printer expects letter-sized paper (8.5 x 11 inches) but the tray contains legal-sized paper (8.5 x 14 inches), the printer may try to pull more paper than it needs, resulting in a jam.
To fix this issue, the team should check and adjust the tray settings according to the paper they are using. They should also make sure that the paper is loaded correctly and not overfilled or mixed with different sizes or types of paper. Some printers have a manual feed option that allows users to select the paper size and type before printing, which can prevent paper jams from occurring.
References:
*Fix Paper Jam Errors | HP Support, section "Paper jams".
*Common Causes of Paper Jams and How to Fix Them - 1ink.com, section "Make Sure You're Loading the Paper Correctly".
*How to Fix a Paper Jam in a Printer - Computer Hope, section "Paper tray is overloaded or not loaded correctly".

The fuser is the part of a laser printer that uses heat and pressure to fuse the toner to the paper. If the fuser is defective or not hot enough, the toner may not adhere properly and smear when touched. The duplexing assembly, toner, and transfer belt are not related to this issue.

Explanation
To increase the volume on a laptop using only a keyboard, a user can press and hold down the Fn key while pressing one of the function keys (usually F1-F12) that has an icon representing volume up.

The most likely answer is C. Fuser.
A fuser is a component in a laser printer that uses heat and pressure to fuse the toner powder onto the paper. If the fuser is damaged or worn out, it can cause humming and grinding noises, as well as ghost images on the printouts. Ghost images are faint copies of previous images that appear on the same page. They are caused by the fuser not heating the toner properly, or by the toner sticking to the fuser roller and transferring to the next page12.
To fix this problem, you should replace the fuser unit with a new one. You can check your printer manual for instructions on how to remove and install the fuser unit. You can also use a diagnostic ruler to measure the distance between the ghost images and determine if the fuser is the source of the problem2. If the ghost images are far apart (between 4cm and 5cm), then the fuser is likely to be faulty.
Reference:
1: Solved: "Ghost Images" When Printing - HP Support Community
2: How to Fix Ghosting When Using a Laser Printer and Toner Cartridges - Inksaver