Online Access Free 220-1201 Practice Test

A technician is replacing a failed power supply in a ten-year-old computer When installing the customer-provided power supply, the technician discovers the ATX connector would not plug into the motherboard. The customer wants a cost-effective solution.
Which of the following should the technician do next?

• A.Rebuild the failed power supply.
• B.Install a modular power supply.
• C.Use a 20-pin to 24-pin adapter.
• D.Adjust the input voltage.

A user reports intermittent Wi-Fi issues in an open office. Other users are not affected. What is the most likely cause?

• A.All users are on the same frequency
• B.Interference from other Wi-Fi signals
• C.The laptop's wireless card is malfunctioning
• D.The antenna is near a device creating electromagnetic interference

SIMULATION 5
A technician is diagnosing several device issues reported by employees.
INSTRUCTIONS
Click on each device to review the issue. Then select the appropriate issue and solution from the drop-down menu. Each option may be used more than once.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

Correct Answer:

A user is having issues when charging a device with a Lightning cable. The cable is not recognized when it is plugged into the device. This issue is usually resolved by flipping the cable over. This issue does not occur with other devices of the same type.
Which of the following would most likely cause the issue?

• A.The cable is failing and needs to be replaced
• B.The charging port is dirty or damaged
• C.The battery may be swelling and needs inspection.
• D.The device needs to be restarted.

A technician needs to configure a shared multifunction printer to consume the least amount of supplies.
Which of the following settings should the technician change?

• A.Sleep timer
• B.User authentication
• C.Tray settings
• D.Duplex configuration