Online Access Free 300-110 Practice Test

An engineer is designing the wired infrastructure to support VoWLAN. Which QoS design should be applied to the switch ports connecting the APs?

• A.Apply a default queueing policy without any trust configuration.
• B.Configure the AP switch port as an untrusted port with a policer at 1 Mbps.
• C.Trust CoS on the AP switch port and mark all traffic to DSCP 0.
• D.Trust DSCP on the AP switch port so that the CAPWAP outer header marking is preserved.

A customer has a Cisco wireless network that supports VoWLAN services. The customer wants supported voice clients to receive roaming recommendations and suggestions from APs. This functionality must not impact non-VoWLAN clients. What should be enabled on the VoWLAN SSID?

• A.802.11k neighbor lists
• B.802.11v BSS Transition Management
• C.CCKM with 802.1X
• D.802.11r Fast Transition

A customer has two Cisco WLCs configured in a SSO cluster. The wireless network supports a large warehouse. The customer purchases new iPads to replace legacy scanners. Both devices connect to a single SSID named Scanning by using WPA2 Personal. The customer wants to use a standards-based method for fast roaming on the new iPads. Which approach meets the scanner requirement and still supports the legacy scanners?

• A.Enable FT PSK and set Fast Transition to Adaptive for the Scanning SSID.
• B.Enable FT 802.1X and set Fast Transition to Adaptive for the Scanning SSID.
• C.Enable optimized roaming globally and enable FT 802.1X on the Scanning SSID.
• D.Enable optimized roaming globally and enable FT PSK on the Scanning SSID.

A customer purchases this Cisco equipment for a new branch office: ?20 Cisco Catalyst 9120 APs ?five Catalyst 9130 APs ?a single Catalyst 9300 Series Switch The customer wants to extend its existing wired and wireless fabric-enabled network to the branch office and manage all devices via a centrally deployed Cisco Catalyst Center (formerly DNA Center). Which Cisco Catalyst Center licenses are required for the branch office equipment?

• A.Cisco Catalyst Advantage for the switch and all the APs
• B.Cisco Catalyst Essentials on the APs and Cisco Catalyst Advantage on the switch
• C.Cisco Catalyst Advantage on the APs and Cisco Catalyst Center Premiere on the switch
• D.Cisco Catalyst Essentials on the switch and all the APs

In an N+1 design, a customer needs certain APs in the emergency department to rejoin the backup controller before all other APs when a failover occurs. Which feature must the engineer include in the design?

• A.AP join profile weighting
• B.mobility group priority
• C.AP fallback
• D.AP failover priority