Online Access Free 300-370 Practice Test

Refer to the exhibit.


A healthcare client has obtained 15 wireless mobile carts and wants to know if they can connect them to the wireless network as it is configured.
Considering these security settings and the client capabilities, which occurs?

• A.The client devices can connect because all capabilities are compatible with the network settings.
• B.The client devices cannot connect because MAC filtering is not enabled.
• C.The client devices cannot connect because it only supports software level encryption.
• D.The client devices cannot connect because WMM is obsolete.

A recently acquired Cisco Aironet 1550 series AP is unable to join the WLC. This message is observed on the AP console:
AAA Authentication Failure for UserName:CC93.1981.0035 User Type: WLAN USER Which action must be taken for the AP to associate with the controller?

• A.Add MAC address CC93.1981.0035 to the Security AAA AP policy Authorization List.
• B.Import the self-signed certificate of the AP to the Security:Certificate:SSC tab.
• C.Authenticate the AP to the WLC from the console using an admin account on the WLC.
• D.Import the self-signed certificate of the AP to the Security:Certificate:LSC tab.
• E.Add MAC address CC93.1981.035 to the Security AAA MAC Filtering tab.

Refer to the exhibits. An engineer is troubleshooting connectivity issues on the guest network.



Which cause of the issue is true?

• A.The interface group has incorrect mappings.
• B.The switchport mode must be configured as access.
• C.The trunk port does not have the correct VLANs allowed.
• D.The spanning-tree portfast trunk command must be removed.

An engineer is concerned about rogue-on-wire and wants to enable port security.
Which guideline must the engineer follow?

• A.Configure ACLs on the switch.
• B.Configure static mac addresses on the switch ports that the APs are connected.
• C.Use 802.1x with port security to prevent MAC spoofing.
• D.Enable port security on dynamic access ports.

Which feature should a network engineer enable within a mixed-client network to ensure that the legacy client operates at the best possible rates?

• A.Band Select
• B.DCA
• C.ClientLink
• D.RRM