Free Access Cisco.300-410.v2025-02-03.q609 Practice Test (Page 87)

Question 426

Refer to the exhibit.

Which subnet is redistributed from EIGRP to OSPF routing protocols?

A.10.2.3.0/26

B.10.1.4.0/24

C.10.1.2.0/24

D.10.2.2.0/24

Question 427

Refer to the exhibit.

Which statement about R1 is true?

A.RIP learned routes are distributed to OSPF with a tag value of one.

B.OSPF redistributes RIP routes only if they have a tag of one.

C.RIP routes are redistributed to OSPF without any changes.

D.R1 adds one to the metric for RIP learned routes before redistributing to OSPF.

Question 428

Refer to the following output:
Router#show ip nhrp detail
10.1.1.2/8 via 10.2.1.2, Tunnel1 created 00:00:12, expire 01:59:47
TypE. dynamic, Flags: authoritative unique nat registered used
NBMA address: 10.12.1.2
What does the authoritative flag mean in regards to the NHRP information?

A.The NHRP mapping entry cannot be overwritten.

B.It was obtained directly from the next-hop server.

C.NHRP mapping is for networks that are local to this router.

D.Data packets are process switches for this mapping entry.

E.The mapping entry was created in response to an NHRP registration request.

Question 429

Refer to the exhibit. After recovering from a power failure. Ethernet0/1 stayed down while Ethernet0/0 returned to the up/up state The default route through ISP1 was not reinstated m the routing table until Ethernet0/1 also came up Which action resolves the issue?

A.Configure the default route through ISP1 with a higher administrative distance than 2.

B.Reference the track object 1 in both static default routes

C.Add a static route to the 8 8.8 8/32 destination through the next hop 203.0.113.1

D.Remove the references to the interface names from both static default routes

Question 430

Refer to the exhibit.

An IP SLA was configured on router R1 that allows the default route to be modified in the event that Fa0/0 loses reachability with the router R3 Fa0/0 interface. The route has changed to flow through router R2. Which debug command is used to troubleshoot this issue?

A.debug ip flow

B.debug ip sla error

C.debug ip routing

D.debug ip packet

Other Version: 10235Cisco.300-410.v2024-12-18.q447; 3701Cisco.300-410.v2023-04-25.q268; 3975Cisco.300-410.v2023-01-28.q148; 2274Cisco.300-410.v2022-11-26.q118; 3198Cisco.300-410.v2022-07-26.q136; 4012Cisco.300-410.v2022-05-02.q98; 7208Cisco.300-410.v2022-01-27.q256

Latest Upload: 282PaloAltoNetworks.NGFW-Engineer.v2026-05-01.q43; 412Nokia.4A0-113.v2026-05-01.q69; 440EC-COUNCIL.312-49v11.v2026-04-30.q214; 403Microsoft.MB-820.v2026-04-30.q101; 274Salesforce.MC-202.v2026-04-30.q57; 322BICSI.INSTC_V8.v2026-04-29.q53; 457NMLS.MLO.v2026-04-28.q82; 299NCARB.Project-Management.v2026-04-28.q27; 546EMC.D-AV-DY-23.v2026-04-27.q184; 1388ServiceNow.CSA.v2026-04-27.q483

Question 426

Question 427

Question 428

Question 429

Question 430

Download PDF File