Free Access Cisco.300-430.v2025-03-19.q297 Practice Test (Page 24)

Question 111

On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised.
Considering that FlexConnect local switching is enabled, which setting is causing this behavior?

A.ISE NAC is enabled

B.802.11r Fast Transition is enabled

C.Client Exclusion is enabled

D.FlexConnect Local Auth is disabled

Question 112

A wireless engineer needs to implement client tracking. Which method does the angle of arrival use to determine the location of a wireless device?

A.received signal strength

B.triangulation

C.time distance of arrival

D.angle of incidence

Question 113

What is an important consideration when implementing a dual SSID design for BYOD?

A.SSIDs for this setup must be configured with NAC State-RADIUS NAC for the clients to authenticate with Cisco ISE, or with NAC State-ISE NAC for Cisco ISE to associate the client.

B.If multiple WLCs are used, the WLAN IDs must be exact for the clients to be provisioned and traverse the network correctly.

C.One SSID is for provisioning and the other SSID is for gaining access to the network. The use of an ACL should not be enforced to make the client connect to the REAL SSID after provisioning.

D.After using the provisioning SSID, an ACL that used to make the client switch SSIDs forces the user to associate and traverse the network by MAC filtering.

Question 114

An engineer has configured passive fallback mode for RADIUS with default timer settings. What will occur when the primary RADIUS fails then recovers?

A.RADIUS requests will be sent to the secondary RADIUS server until the secondary fails to respond.

B.After the inactive time expires the controller will send RADIUS to the primary.

C.Once RADIUS probe messages determine the primary controller is active the controller will revert back to the primary RADIUS.

D.The controller will immediately revert back after it receives a RADIUS probe from the primary server.

Question 115

What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?

A.3 hours

B.24 hours

C.3 days

D.7 days

Other Version: 1590Cisco.300-430.v2024-06-16.q203; 2591Cisco.300-430.v2022-07-25.q104; 4377Cisco.300-430.v2022-02-05.q122; 62Cisco.Ipassleader.300-430.v2021-10-02.by.mick.104q.pdf

Latest Upload: 277PaloAltoNetworks.NGFW-Engineer.v2026-05-01.q43; 394Nokia.4A0-113.v2026-05-01.q69; 424EC-COUNCIL.312-49v11.v2026-04-30.q214; 347Microsoft.MB-820.v2026-04-30.q101; 263Salesforce.MC-202.v2026-04-30.q57; 306BICSI.INSTC_V8.v2026-04-29.q53; 435NMLS.MLO.v2026-04-28.q82; 292NCARB.Project-Management.v2026-04-28.q27; 530EMC.D-AV-DY-23.v2026-04-27.q184; 1362ServiceNow.CSA.v2026-04-27.q483

Question 111

Question 112

Question 113

Question 114

Question 115

Download PDF File