An administrator must create conference resources for phones that are registered to Cisco UCM. The administrator adds Cisco Meeting Server as a Conference Bridge to Cisco UCM to accomplish this task.
Where should the administrator add the Conference Bridge to allow phones to use Cisco Meeting Server for conferences?

Refer to the Following:
Content-Type: application/sdp
Content-Length: 4938
v=0
o=Acano 0 0 IN IP4 10.0.101.120
s=-
c=IN IP4 10.0.101.120
b=CT:16
t=0 0
m=audio 50262 RTP/AVP 108 107 109 110 9 99 111 100 104 103 0 8 15 102 18 13 118 101 a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48 a=crypto:2 AEAD_AES_256_GCM
********************************************************************|2^48 a=crypto:3 AES_CM_128_HMAC_SHA1_80
*******************************************************|2^48
a=crypto:4 AES_CM_128_HMAC_SHA1_32
*******************************************************|2^48
<details omitted>
m=video 50264 RTP/AVP 97 116 114 96 34 31 100 121
b=TIAS:16000
a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48 a=crypto:2 AEAD_AES_256_GCM
********************************************************************|2^48 a=crypto:3 AES_CM_128_HMAC_sha1_80
*******************************************************|2^48
a=crypto:4 AES_CM_128_HMAC_sha1_32
*******************************************************|2^48
a=content:main
a=sendrecv
a=sprop-source:1 count=2;policies=cs:1
a=sprop-simul:1 1 *
a=rtcp-fb:* nack pli
a=rtcp-fb:* ccm fir
a=rtcp-fb:* ccm cisco-scr
a=extmap:1 http://protocols.cisco.com/virtualid
a=extmap:2 http://protocols.cisco.com/framemarking
a=rtpmap:97 H264/90000
a=fmtp:97
profile-level-id=42800a;max-mpbs=489600;max-fs=8160;max-cpb=4000;max-dpd=4752;max-fps=6000 Users report that they do not see a high-quality picture on the high-definition endpoints when they call into Cisco Meeting Server. An engineer must extract the SDP that is offered by Cisco Meeting Server from the SIP traces to troubleshoot. What is the cause of this issue?

Refer to the exhibit.

What does this notification indicate about activity over the last 90 days?

In the Cisco TMS GUI, a Cisco UCM registered system shows these error details:
* Provisioning mode is set to Cisco UCM for this system.
* The system cannot be refreshed or scheduled.
* To manage this system as a Cisco TMS system, the provisioning mode needs to be changed to Cisco TMS.
* To add the system as Cisco UCM managed system, it must be added through the Cisco UCM that is provisioning the system.
What should be done to resolve this error?

In a cluster of Cisco Meeting Servers, one of the peer servers has the FQDN CMS1.local, and the web admin is running on 445. Which server address must be configured in the clustered Call Bridges page?