Which persistence method will always recognize a client when the client returns to the same virtual server?

The partial configuration below includes an iRule, a virtual server, and pools. When traffic from the client at 160.10.10.10:2056 connects to the virtual server Test_VS and sends an HTTP request, what will the client's source address be translated to as the traffic is sent to the chosen pool member? pool Test_Pool { member
10.10.10.10:80 member 10.10.10.11:80 } snatpool lower_range { member
10.10.10.1 } snatpool upper_range { member 10.10.10.2 } rule Test_iRule { when CLIENT_ACCEPTED. { if { [TCP::local_port]
< 2024 }{ snatpool lower_range } else { snatpool upper_range } virtual Test_VS { destination 200.10.10.1 :http pool Test_Pool rule Test_i Rule }

Which action CANNOT be performed by an iRule?

An LTM has the 3 virtual servers, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServerl Destination: 10.10.2.102:443 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: All Addresses SNAT Address: SNAT Pool with 2 members - 172.16.20.50 and 192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1;
10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.102:80. When the request is processed, what will be the destination IP address?

An LTM has the 3 virtual servers, a SNAT, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: All Addresses SNATAddress: SNAT Pool with 2 members- 172.16.20.50 and 192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the destination IP address?