When reconfiguring an access port to a trunk, the error shown in SW1's log indicates that there is a mismatch in the allowed VLANs on the trunk. To resolve this error, the allowed VLANs on both sides of the port-channel must be consistent. Option C is the correct command set because it specifies the allowed VLANs on the trunk to include VLANs 10 and 20, which must match on both switches to form a successful trunk link.

Explanation:

Once you know the complete combination of transmitter power level, the length of cable, and the antenna gain, you can figure out the actual power level that will be radiated from the antenna. This is known as the effective isotropic radiated power (EIRP), measured in dBm.
EIRP is a very important parameter because it is regulated by governmental agencies in most countries. In those cases, a system cannot radiate signals higher than a maximum allowable EIRP. To find the EIRP of a system, simply add the transmitter power level to the antenna gain and subtract the cable loss.