Free Access Cisco.350-601.v2023-02-23.q125 Practice Test (Page 7)

Question 26

A network engineer repeatedly saves a configuration on Catalyst switches to NVRAM using the write memory command. What action should be taken to implement the same action on Nexus switches?

A.Use the write memory command to save the configuration.

B.Use the alias command to use the write memory command.

C.Use the exit command to leave the configuration mode and save the configuration automatically.

D.Use the wri command to use the copy running-config startup-config command.

Question 27

Which storage protocol reduces file locks by using leasing?

A.CIFS

B.NFS 4

C.NFS 3

D.SMB

Question 28

A network engineer must enable port security on all cisco MDS series switches in the fabric. The requirement is to avoid the extensive manual configuration of the switch ports. Which action must be taken to meet these requirements?

A.Activate CFS distribution and the auto-learning port security feature.

B.Activate CFS distribution and file auto-learning port security feature on a per-VSAN basis.

C.Enable the auto-learning port security feature on a per-VSAN basis.

D.Enable the auto-learning port security feature.

Question 29

An engineer must configure a Cisco UCS blade system that is managed by Cisco UCS Manager. All four connected interfaces between the blade system and the fabric interconnects must be used. Additionally, the connectivity must tolerate any link failure between the l/O module and the fabric interconnects. Which action accomplishes these requirements?

A.Configure Firmware Auto Sync Server policy to Auto Acknowledge

B.Configure Link Group Preference to Port Channel.

C.Configure port aggregation with LACP policy set to default

D.Configure chassis/FEX discovery pokey action to four links

Question 30

An engineer must design an automation solution for the Cisco ACI Fabric to speed up the deployment of logical network elements for tenant provisioning. When creating a solution, the engineer must keep in mind that the tool must support these requirements:
Allow the rapid creation and removal of logical containers.
Support the creation of custom modules and data structures.
Be extensible with external libraries and modules.
Allow rapid testing of code using an on-demand execution environment.
Which automation tool meets these requirements?

A.Chef

B.Python

C.SaltStack

D.YAML

Other Version: 2699Cisco.350-601.v2024-11-21.q619; 2369Cisco.350-601.v2023-12-23.q325; 1946Cisco.350-601.v2023-01-26.q127; 4942Cisco.350-601.v2022-05-20.q177; 2859Cisco.350-601.v2022-05-10.q129; 65Cisco.Trainingdump.350-601.v2022-01-01.by.nat.127q.pdf

Latest Upload: 200PaloAltoNetworks.NGFW-Engineer.v2026-05-01.q43; 290Nokia.4A0-113.v2026-05-01.q69; 248EC-COUNCIL.312-49v11.v2026-04-30.q214; 226Microsoft.MB-820.v2026-04-30.q101; 205Salesforce.MC-202.v2026-04-30.q57; 203BICSI.INSTC_V8.v2026-04-29.q53; 332NMLS.MLO.v2026-04-28.q82; 241NCARB.Project-Management.v2026-04-28.q27; 454EMC.D-AV-DY-23.v2026-04-27.q184; 1107ServiceNow.CSA.v2026-04-27.q483

Question 26

Question 27

Question 28

Question 29

Question 30

Download PDF File