Free Access Cisco.350-801.v2022-05-10.q105 Practice Test (Page 19)

Question 86

What happens to voice packets from a Cisco 8845 IP phone in the QoS trust boundary?

A.The voice packets are classified by the phone, and the classification is accepted.

B.Cisco UCM determines how the voice packets are classified.

C.The phone and access layer switch negotiate the classification of packets.

D.The voice packets are not trusted, and the access layer switch reclassifies the packets.

Question 87

Which issue can occur if QoS is not Deployed on a Cisco Collaboration architecture across the WAN?

A.Packet fragmentation

B.Excessive jitter

C.Unexpected shut-down on Cisco Unified Communications Manager

D.403 Forbidden errors on SIP calls

Question 88

Which configuration on Cisco Unified Communication Manager is required for SIP MWI to work?

A.The line partition must be inside the inbound CSS assigned to the CUC SIP trunk.

B.Assign a MWI extension on the mailbox.

C.The line partition must be inside the rerouting CSS assigned to the Cisco assigned to the Cisco unity connection SIP trunk.

D.Set the "Enable message waiting indicator" on the port group.

Question 89

Refer to the exhibit.

An administrator is attempting to register a SIP phone to a Cisco UCM but the registration is failing. The IP address of the SIP Phone is 10.117.34 222 and the IP 1 address of the Cisco UCM is 10.0.101.10. Pings from the SIP phone to the Cisco UCM are successful. What is the cause of this issue and how should it be resolved?

A.DNS lookup for the Cisco UCM FQDN is failing. The SIP phone must be reconfigured with the proper DNS server.

B.The certificates on the SIP phone are not trusted by the Cisco UCM. The SIP phone must generate new certificates.

C.An network device is blocking TCP port 5060 from the SIP phone to the Cisco UCM. This device must be reconfigured to allow traffic from the IP phone.

D.An NTP mismatch is preventing connection of the TCP session between the SIP phone and the Cisco UCM. The SIP phone and Cisco UCM must be set with identical NTP sources.

Question 90

Refer to the exhibit.

An engineer verifies the configured of an MGCP gateway. The commands are already configured. Which command is necessary to enable MGCP?

A.Device(config)# mgcp enable

B.Device (config) # com-manager active

C.Device(config)# ccm-manager enable

D.Device (config)# mgcp

Other Version: 2219Cisco.350-801.v2023-12-01.q229; 1466Cisco.350-801.v2023-09-05.q108; 2227Cisco.350-801.v2023-06-21.q172; 2722Cisco.350-801.v2022-11-01.q130; 3671Cisco.350-801.v2022-08-26.q165; 3602Cisco.350-801.v2022-05-13.q166; 89Cisco.Prepawaytest.350-801.v2022-02-13.by.martin.183q.pdf

Latest Upload: 282PaloAltoNetworks.NGFW-Engineer.v2026-05-01.q43; 412Nokia.4A0-113.v2026-05-01.q69; 440EC-COUNCIL.312-49v11.v2026-04-30.q214; 403Microsoft.MB-820.v2026-04-30.q101; 274Salesforce.MC-202.v2026-04-30.q57; 322BICSI.INSTC_V8.v2026-04-29.q53; 457NMLS.MLO.v2026-04-28.q82; 299NCARB.Project-Management.v2026-04-28.q27; 546EMC.D-AV-DY-23.v2026-04-27.q184; 1388ServiceNow.CSA.v2026-04-27.q483

Question 86

Question 87

Question 88

Question 89

Question 90

Download PDF File