Free Access Cisco.350-801.v2022-11-01.q130 Practice Test (Page 5)

Question 16

Refer to the exhibit.

A customer submits this output, captured on a Cisco IOS router. Assuming that an MGCP gateway is configured with a ISDN BRI interface, which BRI changes resolve the issue?
A)

A.Option C

B.Option A

C.Option B

D.Option D

Question 17

Which action is required for a firewall configuration on a Mobile and Remote Access through Cisco Expressway deployment?

A.The internal firewall must allow these inbound and outbound connections between Expressway-C and Expressway-E. SIP: HTTPS (tunnelled overSSH between C and E): TCP 2222; TCP 7001; Traversal Media: UDP 2776 to 2777 (or 36000 to 36011 for large VM/appliance): XMPP: TCP 7400.

B.The traversal zone on Expressway-C points to Expressway-E through the peer address field on the traversal zone, which specifies the Expressway-E server address. For dual NIC deployments, set the Expressway-E address using an FQDN that resolves the IP address of the internal interface

C.Do not use a shared address for Expressway-E and Expressway-C, as the firewall cannot distinguish between them If static NAT for IP addressing on Expressway-E is used, ensure that any NAT operation on Expressway-C does not resolve the same traffic IP address Shared NAT is not supported.

D.The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061; HTTPS: TCP 8443: XMPP: TCP 5222; Media: UDP 36002 to 59999.

Question 18

An administrator must configure the local route group feature on cisco UCM. Which step will enable this feature?

A.For each route list configure a route group to use as a Local Route Group.

B.For each route group, check the box for the Local Route Group feature.

C.For each route pattern, select the Local Route Group as the destination.

D.For each device pool. configure a route group to use as a Local Route Group for that device pool

Question 19

Which action is required if an engineer wants to have Cisco Unified Communications Manager control the configuration for an MGCP gateway?

A.Configure the Cisco Unified CM's IP in voice service VoIP.

B.From Cisco Unified CM > Device > Gateway > Add gateway, check the auto-configuration check box.

C.Apply the ccm-manager configuration commands to the gateway.

D.Upload the custom configuration in the TFTP server in Cisco Unified CM.

Question 20

Refer to the exhibit.

This INVITE is sent to an endpoint that only supports G.729. what must be done for this call to succeed?

A.Noting; both sides support G.729.

B.Nothing; both sides support payload type.101.

C.ADD a media termination point that supports G.711ulaw and G.729.

D.Add a transcoder that supports G.711ualw and G.729.

Other Version: 1148Cisco.350-801.v2026-08-01.q291; 2592Cisco.350-801.v2023-12-01.q229; 1776Cisco.350-801.v2023-09-05.q108; 2798Cisco.350-801.v2023-06-21.q172; 4168Cisco.350-801.v2022-08-26.q165; 4092Cisco.350-801.v2022-05-13.q166; 2873Cisco.350-801.v2022-05-10.q105; 89Cisco.Prepawaytest.350-801.v2022-02-13.by.martin.183q.pdf

Latest Upload: 121Apple.App-Development-with-Swift-Certified-User.v2026-09-30.q14; 136Microsoft.AB-210.v2026-09-30.q53; 152Salesforce.OmniStudio-Consultant.v2026-09-30.q102; 143InsuranceLicensing.Life-and-Accident-and-Health-or-Sickness-Producer-Combo.v2026-09-30.q93; 173Salesforce.Data-Architect.v2026-09-29.q136; 180Huawei.H19-321.v2026-09-29.q100; 125SAP.C_S4CPB.v2026-09-28.q7; 135CMAA.Construction-Manager.v2026-09-28.q23; 157PaloAltoNetworks.XDR-Engineer.v2026-09-28.q50; 160Anthropic.CCAR-F.v2026-09-27.q53

Question 16

Question 17

Question 18

Question 19

Question 20

Download PDF File