Free Access Cisco.350-801.v2023-12-01.q229 Practice Test (Page 20)

Question 91

When designing the capacity for a Cisco UCM 12.x cluster, an engineer must decide which VMware template will be used for each node. What is the lowest number of users supported in a template and the highest number of users in a template?

A.750 and 15.000 users

B.500 and 10.000 users

C.1000 and 10.000 users

D.750 and 10.000 users

Question 92

What is the maximum number of servers that are in an IM and Presence presence redundancy group?

A.10

B.6

C.2

D.4

Question 93

Which actions required for a firewall configuration on a Mobile and Remote Access through Cisco Expressway deployment?

A.The traversal zone on Expressway-c points to Expressway-e through the peer address field on the traversal zone, which specifies the Expressway-e server address. For dual NIC deployments, set the Expressway-e address using an FQDN that resolves the IP address of the internal interface

B.The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061; HTTPS: TCP 8443; XMPP TCP 5222; media: UDP 36002 to 59999

C.Do not use a shared address for Expressway-e and Expressway-c, as the firewall cannot distinguish between them. If static NAT for IP addressing on Expressway-e is used, ensure that any NAT operation on expressway-c does not resolve the same traffic IP address. Shared NAT IS not supported

D.The internal firewall must allow these inbound and outbound connections between expressway - c and Expressway-e :sip;HTTPS(tunneled over SSH between C and E.

Question 94

Refer to the exhibit.

An administrator configures a secure SIP trunk on Cisco UCM. Which value is needed in the Secure Certificate Subject or Subject Alternate Name field to accomplish this task?

A.the fully qualified domain name of all Cisco UCM nodes that run the CallManager service

B.the common name of the remote device certificates

C.the common name of the Cisco UCM CallManager certificate

D.the fully qualified domain name of the remote device that is configured on the SIP trunk

Question 95

What are the predefined call handlers in Cisco Unity Connection?

A.opening greeting, operator, and goodbye

B.opening greeting, welcome, and default system

C.greetings, operator, and closed

D.caller input, greetings, and transfer

Other Version: 1459Cisco.350-801.v2023-09-05.q108; 2220Cisco.350-801.v2023-06-21.q172; 2717Cisco.350-801.v2022-11-01.q130; 3665Cisco.350-801.v2022-08-26.q165; 3600Cisco.350-801.v2022-05-13.q166; 2574Cisco.350-801.v2022-05-10.q105; 89Cisco.Prepawaytest.350-801.v2022-02-13.by.martin.183q.pdf

Latest Upload: 277PaloAltoNetworks.NGFW-Engineer.v2026-05-01.q43; 390Nokia.4A0-113.v2026-05-01.q69; 423EC-COUNCIL.312-49v11.v2026-04-30.q214; 346Microsoft.MB-820.v2026-04-30.q101; 262Salesforce.MC-202.v2026-04-30.q57; 306BICSI.INSTC_V8.v2026-04-29.q53; 435NMLS.MLO.v2026-04-28.q82; 292NCARB.Project-Management.v2026-04-28.q27; 526EMC.D-AV-DY-23.v2026-04-27.q184; 1361ServiceNow.CSA.v2026-04-27.q483

Question 91

Question 92

Question 93

Question 94

Question 95

Download PDF File