Online Access Free 352-011 Practice Test

Refer to the Exhibit.

The server is running multiple VLANs on its NIC. Which two Layer 2 features should be applied to the network location identified by a circle? (Choose two)

• A.BPDU guard
• B.UDLD
• C.Loop guard
• D.Port Fast
• E.PortFast trunk
• F.BPDU filtering

Refer to the exhibit.

Which solution must be used to send traffic from the foreign wireless LAN controller to the anchor wireless LAN controller?

• A.Send packets without encapsulation to the anchor controller over the routed network
• B.Send packets from the foreign controller to the anchor controller via IPinIP or IPsec tunnel
• C.Encapsulate packets into an EoIP tunnel and send them to the anchor controller
• D.Send packets from the foreign controller to the anchor controller via Layer 3 MPLS VPN or VRF-Lite

An operations engineer asks for your help with a new switching deployment. The engineer confirms that STP is enabled on an edge switch, and a particular port is connected to another switch. The switch is not receiving configuration BPDUs, although it appears that everything is functioning correctly in the network. What is the design explanation?

• A.Storm control broadcast is enabled on the port
• B.Bridge Assurance is enabled on the port
• C.REP is enabled on the port
• D.BPDU Guard is enabled on the port

When is it required to leak routes into an IS-IS Level 1 area?

• A.when unequal cost load balancing is required between the backbone and non-backbone areas
• B.when MPLS L3VPN PE devices are configured in the Level 1 areas
• C.when equal cost load balancing is required between the backbone and non-backbone areas
• D.when a multicast RP is configured in the non-backbone area

A new video multicast application is deployed in the network. The application team wants to use the 239.0.0.1 multicast group to stream the video to users. They want to know if this choice will impact the existing multicast design. What impact will their choice have on the existing multicast design?

• A.Because 239.0.0.1 is a private multicast range, a flood of PIM packets that have to be processed by the CPU and hosts will be sent by the routers in the network.
• B.The 239.0.0.1 group address maps to a system MAC address, and all multicast traffic will have to be sent to the CPU and flooded out all ports.
• C.The multicast application sends too many packets into the network and the network infrastructure drops packets.
• D.Because 239.0.0.1 is a private multicast range, the rendezvous point has to send out constant group updates that will have to be processed by the CPU and hosts.