Online Access Free 3V0-21.23 Practice Test

An architect is designing the virtual networking components of a vSphere-based solution that will provide an environment for the development of a new latency sensitive stock trading application.
The following information was identified within the initial meeting with the customer:
The customer has vCenter Standard and vSphere Standard licenses left over from a previous project.
The customer's CFO has approved budget for additional purchases, if required.
The following requirements were also identified during the meeting:
The solution must support 500 development workloads concurrently running in the secondary site.
The solution must support the ability to complete all vSphere Operational Management centrally.
The solution must ensure business-critical applications are not impacted by vSphere system-level operations.
Given the requirements, the architect has decided on a single 20-node cluster for development.
Which three additional design decisions should the architect make to meet these requirements? (Choose three.)

• A.The solution will configure Traffic Shaping policies to restrict network bandwidth on ingress and egress.
• B.The solution will deploy a single VMware Standard Switch that will be configured identically on each host.
• C.The solution will deploy VMware vSphere Enterprise Plus on all hosts within the cluster.
• D.The solution will configure Network I/O control to ensure that system-level bandwidth does not impact workload network traffic.
• E.The solution will deploy VMware vSphere Standard on all hosts within the cluster.
• F.The solution will deploy a single vSphere Distributed Switch with each host connected to it.

The following is a list of requirements from a discovery workshop for a new VMware hosting platform system design:
REQ001 - The architecture must support recoverability to the VMware Cloud Disaster Recovery (VCDR) service.
REQ002 - The architecture must support high availability (HA) and fault tolerance (FT).
REQ003 - The architecture must support reducing existing energy consumption and carbon footprint.
REQ004 - The architecture must provide support for network virtualization using distributed virtual switches.
Which requirement would be classified as a business (formerly functional) requirement?

• A.The architecture must support high availability (HA) and fault tolerance (FT).
• B.The architecture must provide support for network virtualization using distributed virtual switches.
• C.The architecture must support recoverability to the VMware Cloud Disaster Recovery (VCDR) service.
• D.The architecture must support reducing existing energy consumption and carbon footprint.

An architect is creating a design for a new vSphere solution to meet the following business requirement:
REQ001 - Reduce operational expenditure
Which design decision could the architect include in the logical design to satisfy this requirement?

• A.Use an N + 1 design to define the required capacity on all clusters.
• B.Use vSphere Lifecycle Manager on all clusters.
• C.Use vSphere Standard licenses on all clusters.
• D.Use heterogeneous hardware for the hosts in all clusters.

An architect is designing a new vSphere architecture and notes the following information during the design workshops:
vSphere distributed switches (VDS) will be used for all vSphere clusters. Switch naming will be based on cluster name, resource type function and switch number.
Port group naming will be based on function, role and VLAN number range.
Each host has two physical network cards each with two NIC ports:
- Card A aligns to vmnic0 and vmnic1
- Card B aligns to vmnic2 and vmnic3
The architecture must provide resilient network connections.
Management Services will use VLAN ID 43.
Virtual machines access VLAN ID 100.
The vSphere infrastructure will use a hyper-converged storage architecture.
How should the architect document the VDS physical design based on the noted information?

• A.vSwitch Prod_DVS_01 will have 4 uplinks Port group name "pg_mgmt_43"- uplink = vmnic0, vmnic1- teaming policy = active/passivePort group name "pg_VM_100"- uplink = vmnic2, vmnic3- teaming policy = active/passive
• B.vSwitch Prod_DVS_01 will have 4 uplinksPort group name "pg_mgmt_43"- uplink = vmnic0, vmnic2- teaming policy = active/passivePort group name "pg_VM_100"- uplink = vmnic1, vmnic3- teaming policy = active/passive
• C.vSwitch Prod_DVS_01 will have 2 uplinksPort group name "pg_mgmt_43"- uplink = vmnic0- teaming policy = active/passivePort group name "pg_VM_100"- uplink = vmnic1- teaming policy = active
  /passive
• D.vSwitch Prod_DVS_01 will have 4 uplinksPort group name "pg_mgmt"- uplink = vmnic0, vmnic2- teaming policy = active/passivePort group name "pg_VM"- uplink = vmnic1, vmnic3- teaming policy = active/passive

An architect is working on a security design for a shared storage environment. The storage array provides connectivity by the NFS protocol.
Which two design decisions could the architect include for this solution? (Choose two.)

• A.Create a challenge handshake authentication protocol (CHAP) password to prevent unauthorized access
• B.Create a dedicated VLAN
• C.Create a dedicated Fibre Channel network
• D.Create a dedicated storage network
• E.Create dedicated volumes for sensitive data