A.Nothing. The two hosts can send data to each other at any time.

B.The two hosts must negotiate a path MTU to be used for the data exchange.

C.The two hosts must perform a 3-way handshake before transmitting data.

D.The two hosts must exchange encryption keys before transmitting data.

A.Contains all the components required to configure and run protocols on the Alcatel-Lucent 7750 SR/7450 ESS.

B.Loads the router configuration.

C.Transfers the router configuration from the router to the network management system.

D.Loads the router software image.

A.Broadcast storms caused by redundancy in Layer 2 networks.

B.Missing protocol field in the Ethernet header.

C.Unreliable data transfer in Layer 2 networks.

D.Missing sequence number in the Ethernet header.

A.A PE router only connects to P routers.

B.A PE router connects to at least one P router.

C.A PE router only connects to CE devices.

D.PE routers support many different interface types connecting to CE devices.

E.PE routers only support Ethernet interfaces connecting to the CE.

F.A PE router connects to at least one CE device.

A.A routing entry, included in the RIB by default, that forwards packets with an unknown destination to the CPM for inspection.

B.A manual entry used when the destination address of a network is not specifically listed in the routing table.

C.A manual entry that matches a specific /32 host address using the least cost to the destination.

D.A default entry in the FIB used when forwarding multicast and broadcast packets.