A.The SDP ID must match between the two PE routers in both directions.

B.Traffic engineering must be enabled in the IGP.

C.RSVP must be enabled on both PE routers.

D.The transport tunnel must be operationally up between the two PE routers in both directions.

E.LDP must be enabled on both PE routers.

F.The VC-ID must match between the two PE routers in both directions.

A.The router with router ID 10.10.10.5 is an ASBR.

B.The router with router ID 10.10.10.4 is in the same area as the router with router ID 10.10.10.5.

C.The router with router ID 10.10.10.3 is an ASBR.

D.The router with router ID 10.10.10.5 originated the AS summary LSA in its own area.

A.The inner label identifies the VPRN service.

B.The VPRN service label contains the customer's IP address.

C.The outer label allows traffic to transit across the MPLS network.

D.MP-BGP is used to signal VPRN labels.

A.It will show the hops taken between service endpoints.

B.It will test the SDPs of a service in both directions.

C.It will test the delay across the service.

D.It will test the round-trip connectivity of the service.

A.Router R1 switches to a secondary path.

B.Router R4 switches to a standby secondary path.

C.Router R1 updates its FIB after a new SPF calculation.

D.Router R4 switches to a FRR path.