Online Access Free 650-294 Practice Test

Which feature or features will work on a new Cisco TelePresence VCS as soon as the IP configuration is done?

• A.H.323 and SIP
• B.H.323
• C.H.323, SIP, and Interworking
• D.H.323. SIP, Interworking, and Firewall Traversal

What should an engineer use to back up the configuration of a Cisco TelePresence VCS?

• A.SCP to download the file called "backup.tft"
• B.backup and restore tool
• C.serial port and the backup command
• D.The serial port and the xbackup command

How can you register a prefix to route all SIP calls beginning with that prefix to the Cisco TelePresence MCU?

• A.You cannot; all SIP addresses must be registered individually.
• B.You cannot; you need to use a suffix in the form of a domain.
• C.The username is used as the suffix.
• D.The H.323 prefix is automatically used.

You have configured your Cisco TelePresence Codec C90 but discover unwanted noise during use. What best practice will help avoid this problem?

• A.Recycle the power on your system after adding each additional input
• B.Connect only one device at a time to an input and avoid daisy-chaining
• C.If you are not using an input turn it off
• D.Daisy-chain additional devices using a serial cable to provide separate power suppliers

Which on a call, how do you add an additional participant to call on your MultiSite-enabled endpoint?

• A.Press the hold the End Call key to bring up the dialing menu
• B.Press and hold the Call key to bring up the dialing menu
• C.Press the Home button to return to the menu, and select the Add Participant button
• D.Press the Call key, and choose or dial the number of the other participant