A.Navigate to Home / Services / Events / Logs / Log Settings, then click on 'text search' and then type
'down' into the text search box, then click on Apply.

B.Navigate to Home / Services / Events / Logs / Log Viewer, then click on Filter, then Enable, and type
'down' into the Message box, then click on Apply.

C.Export the entire log file to your local PC, and then locally search with an application.

D.Navigate to Home / Services / Events / Logs / Log Harvester, then click on Harvest logs, then type
'down' into the text contains box, then click on Apply.

E.Navigate to Home / Services / Events / Logs / Log Viewer, then click on Filter, then Enable, and type
'-m down' into the Message box, then click on Apply.

F.Use the Linux command grep -iR "down" /var/log/avaya

A.Element status

B.Utilized Code

C.Caller ID

D.QOS Analytics

E.Caller location

F.Destination IP address

A.The Avaya Communicator receives its SIP Controller List via 46xxsettings.txt file download, whereas the 96x1 receives its SIP Controller List by PPM download.

B.If required, Avaya Communicator and 96X1SIP clients will automatically upgrade themselves from software stored on the SBCE.

C.Avaya Communicator registers with CM via SBCE whereas the 96X1SIP telephone registers with SM via SBCE.

D.Avaya Communicator registers with SM via SBCE whereas the 96X1SIP telephone registers with CM via SBCE.

E.Both Avaya Communicator and 96X1SIP clients register with SM via SBCE and receive their SIP Controller List by PPM download.

A.during the origination phase (imsorig) of call processing

B.during the dialing analysis phase (imsdialana) of call processing

C.during the routing phase (imsroute) of call processing

D.during the termination phase (imsterm) of call processing

E.during the initialization phase (imsinit) of call processing

A.Execute the display alarms command, then change the 'Previous ?' field from N to Y and hit F3.

B.Execute the display alarms command, then change the 'Historical ?' field from N to Y and hit F3.

C.Execute the display alarms active command and hit F3.

D.Execute the display alarms command, then change the 'Resolved ?' field from N to Y and then hit F3.

E.Execute the display alarms previous command and hit F3.