Online Access Free API-SIEE Practice Test

In a Class I hazardous area, what is the maximum distance from an enclosure, containing arcing devices should a conduit seal be located?

• A.10 inches 25.4 cm
• B.4 inches 10.16 cm away from the closest union or coupling
• C.18 inches 45.72 cm
• D.12 inches 30.48 cm

What is the purpose of an insulation resistance reading?

• A.To evaluate the condition of the insulation between conductors and ground
• B.To determine the resistance of the conductors
• C.To determine if the conductors are properly terminated
• D.To evaluate the insulation and condition of the grounding

According to API 541, during a witness or observed test of a 500 hp kW induction motor, the purchaser shall have the right to observe all the following, which may occur due to the expected or unexpected part or event of the test except:

• A.reassembly of the motor.
• B.disassembly of the rotor.
• C.dismantling of the motor.
• D.inspection of the motor.

Inspections, examinations, and tests must be performed in accordance with the source Inspection Test Plan, project specification, applicable codes and standards and meet:

• A.manufacturer's standard.
• B.the applicable acceptance criteria.
• C.commonly accepted industry practice.
• D.published catalog data.

According to API 541, prior to mechanical running test, each mounting foot shall be checked for "soft feet." How is this check conducted?

• A.Feeler gauges are used at the foot to base interface to verify gap tolerance has not been exceeded
• B.A dial indicator is oriented vertically and zeroed prior to base bolt tightening with a reading taken after tightening to confirm movement is within tolerance
• C.Mounting bolt torque is verified with a calibrated torque wrench with no visible gaps observed between the foot and base interface
• D.After torquing mounting bolts, a vertically oriented, zeroed, dial indicator is attached to each foot and a reading taken after loosening of the bolt torque to verify movement is within tolerance