The primary reason an IS auditor would recommend replacing universal PIN codes with an RFID access card system at a data center is to improve traceability (A). Traceability is the ability to track and monitor the activities and movements of individuals or objects within a system or environment. Traceability is important for ensuring security, accountability, and compliance in a data center, where sensitive and critical data are stored and processed.
An RFID access card system can improve traceability by using RFID technology to verify and record the identity and access of each user who enters or exits the data center. RFID stands for Radio Frequency Identification, and it enables wireless communication between a reader and an RFID tag. An RFID tag is installed in a door key card or fob, which users use to gain access to the data center. An RFID reader is installed near the door, and it contains an antenna that receives data transmitted by the RFID tag. A control panel is a computer server that reads and interprets the data passed along by the RFID reader. A database is a storage system that stores the data collected by the control panel1.
An RFID access card system can provide several benefits for traceability, such as123:
* It can uniquely identify each user and their access level, and prevent unauthorized access or impersonation.
* It can record the date, time, and duration of each user's access, and generate logs and reports for auditing purposes.
* It can monitor the location and status of each user within the data center, and alert security personnel in case of any anomalies or emergencies.
* It can integrate with other security systems, such as cameras, alarms, or biometrics, to enhance verification and protection.
A universal PIN code system, on the other hand, can compromise traceability by using a single or shared personal identification number (PIN) to grant access to multiple users. A universal PIN code system can pose several risks for traceability, such as4:
* It can be easily guessed, stolen, shared, or compromised by malicious actors or insiders.
* It can not distinguish between different users or their access levels, and allow unauthorized or excessive access.
* It can not record or track the activities or movements of each user within the data center, and create gaps or errors in the audit trail.
* It can not integrate with other security systems, and provide limited verification and protection.
Therefore, an IS auditor would recommend replacing universal PIN codes with an RFID access card system at a data center to improve traceability.
References:
* RFID Access Control Guide: 4 Best RFID Access Control Systems - ButterflyMX
* Choosing Card Technology in 2023 | ICT
* RFID Vs Magnetic Key Cards: What's The Difference? - Go Safer Security
* RFID vs Barcode - Advantages, Disadvantages & Differences

Explanation/Reference:
The word INCORRECT is the keyword used in the question.
You need to find out invalid layer-protocol mapping.
The UDP protocol works at Transport layer of a TCP/IP model.
For your exam you should know below information about TCP/IP model:
Network Models

Layer 4. Application Layer
Application layer is the top most layer of four layer TCP/IP model. Application layer is present on the top of the Transport layer. Application layer defines TCP/IP application protocols and how host programs interface with Transport layer services to use the network.
Application layer includes all the higher-level protocols like DNS (Domain Naming System), HTTP (Hypertext Transfer Protocol), Telnet, SSH, FTP (File Transfer Protocol), TFTP (Trivial File Transfer Protocol), SNMP (Simple Network Management Protocol), SMTP (Simple Mail Transfer Protocol) , DHCP (Dynamic Host Configuration Protocol), X Windows, RDP (Remote Desktop Protocol) etc.
Layer 3. Transport Layer
Transport Layer is the third layer of the four layer TCP/IP model. The position of the Transport layer is between Application layer and Internet layer. The purpose of Transport layer is to permit devices on the source and destination hosts to carry on a conversation. Transport layer defines the level of service and status of the connection used when transporting data.
The main protocols included at Transport layer are TCP (Transmission Control Protocol) and UDP (User Datagram Protocol).
Layer 2. Internet Layer
Internet Layer is the second layer of the four layer TCP/IP model. The position of Internet layer is between Network Access Layer and Transport layer. Internet layer pack data into data packets known as IP datagram's, which contain source and destination address (logical address or IP address) information that is used to forward the datagram's between hosts and across networks. The Internet layer is also responsible for routing of IP datagram's.
Packet switching network depends upon a connectionless internetwork layer. This layer is known as Internet layer. Its job is to allow hosts to insert packets into any network and have them to deliver independently to the destination. At the destination side data packets may appear in a different order than they were sent. It is the job of the higher layers to rearrange them in order to deliver them to proper network applications operating at the Application layer.
The main protocols included at Internet layer are IP (Internet Protocol), ICMP (Internet Control Message Protocol), ARP (Address Resolution Protocol), RARP (Reverse Address Resolution Protocol) and IGMP (Internet Group Management Protocol).
Layer 1. Network Access Layer
Network Access Layer is the first layer of the four layer TCP/IP model. Network Access Layer defines details of how data is physically sent through the network, including how bits are electrically or optically signaled by hardware devices that interface directly with a network medium, such as coaxial cable, optical fiber, or twisted pair copper wire.
The protocols included in Network Access Layer are Ethernet, Token Ring, FDDI, X.25, Frame Relay etc.
The most popular LAN architecture among those listed above is Ethernet. Ethernet uses an Access Method called CSMA/CD (Carrier Sense Multiple Access/Collision Detection) to access the media, when Ethernet operates in a shared media. An Access Method determines how a host will place data on the medium.
IN CSMA/CD Access Method, every host has equal access to the medium and can place data on the wire when the wire is free from network traffic. When a host wants to place data on the wire, it will check the wire to find whether another host is already using the medium. If there is traffic already in the medium, the host will wait and if there is no traffic, it will place the data in the medium. But, if two systems place data on the medium at the same instance, they will collide with each other, destroying the data. If the data is destroyed during transmission, the data will need to be retransmitted. After collision, each host will wait for a small interval of time and again the data will be retransmitted.
Protocol Data Unit (PDU) :
Protocol Data Unit - PDU

The following answers are incorrect:
The other options correctly describe layer-protocol mapping in TCP/IP protocol.
The following reference(s) were/was used to create this question:
CISA review manual 2014 page number 272