It is considered to be a 'Physical Control'
There are three broad categories of access control: administrative, technical, and physical.
Each category has different access control mechanisms that can be carried out manually or automatically. All of these access control mechanisms should work in concert with each other to protect an infrastructure and its data.
Each category of access control has several components that fall within it, a partial list is shown here. Not all controls fall into a single category, many of the controls will be in two or more categories. Below you have an example with backups where it is in all three categories:
* Administrative Controls
* Policy and procedures
- A backup policy would be in place
* Personnel controls
* Supervisory structure
* Security-awareness training
* Testing
* Physical Controls
* Network segregation
* Perimeter security
* Cmputer controls
* Work area separation
* Data backups (actual storage of the media, i:e Offsite Storage Facility)
* Cabling
* Technical Controls
* System access
* Network architecture
* Network access
* Encryption and protocols
* Control zone
* Auditing
* Backup (Actual software doing the backups)
The following answers are incorrect :
Password and resource management is considered to be a logical or technical control.
Identification and authentication methods is considered to be a logical or technical control.
Intrusion Detection Systems is considered to be a logical or technical control.
Reference : Shon Harris , AIO v3 , Chapter - 4 : Access Control , Page : 180 - 185

Explanation

The word NOT is used as a keyword in the question. You need to find out a security control from an given options which in not detective control. Backup data restore is a corrective control and not a detective control.
For your exam you should know below information about different security controls
Deterrent Controls Deterrent Controls are intended to discourage a potential attacker. Access controls act as a deterrent to threats and attacks by the simple fact that the existence of the control is enough to keep some potential attackers from attempting to circumvent the control. This is often because the effort required to circumvent the control is far greater than the potential reward if the attacker is successful, or, conversely, the negative implications of a failed attack (or getting caught) outweigh the benefits of success. For example, by forcing the identification and authentication of a user, service, or application, and all that it implies, the potential for incidents associated with the system is significantly reduced because an attacker will fear association with the incident. If there are no controls for a given access path, the number of incidents and the potential impact become infinite. Controls inherently reduce exposure to risk by applying oversight for a process. This oversight acts as a deterrent, curbing an attacker's appetite in the face of probable repercussions. The best example of a deterrent control is demonstrated by employees and their propensity to intentionally perform unauthorized functions, leading to unwanted events. When users begin to understand that by authenticating into a system to perform a function, their activities are logged and monitored, and it reduces the likelihood they will attempt such an action. Many threats are based on the anonymity of the threat agent, and any potential for identification and association with their actions is avoided at all costs. It is this fundamental reason why access controls are the key target of circumvention by attackers. Deterrents also take the form of potential punishment if users do something unauthorized. For example, if the organization policy specifies that an employee installing an unauthorized wireless access point will be fired, that will determine most employees from installing wireless access points.
Preventative Controls Preventive controls are intended to avoid an incident from occurring. Preventative access controls keep a user from performing some activity or function. Preventative controls differ from deterrent controls in that the control is not optional and cannot (easily) be bypassed. Deterrent controls work on the theory that it is easier to obey the control rather than to risk the consequences of bypassing the control. In other words, the power for action resides with the user (or the attacker). Preventative controls place the power of action with the system, obeying the control is not optional. The only way to bypass the control is to find a flaw in the control's implementation.
Compensating Controls Compensating controls are introduced when the existing capabilities of a system do not support the requirement of a policy. Compensating controls can be technical, procedural, or managerial. Although an existing system may not support the required controls, there may exist other technology or processes that can supplement the existing environment, closing the gap in controls, meeting policy requirements, and reducing overall risk. For example, the access control policy may state that the authentication process must be encrypted when performed over the Internet. Adjusting an application to natively support encryption for authentication purposes may be too costly. Secure Socket Layer (SSL), an encryption protocol, can be employed and layered on top of the authentication process to support the policy statement. Other examples include a separation of duties environment, which offers the capability to isolate certain tasks to compensate for technical limitations in the system and ensure the security of transactions. In addition, management processes, such as authorization, supervision, and administration, can be used to compensate for gaps in the access control environment.
Detective Controls Detective controls warn when something has happened, and are the earliest point in the postincident timeline. Access controls are a deterrent to threats and can be aggressively utilized to prevent harmful incidents through the application of least privilege. However, the detective nature of access controls can provide significant visibility into the access environment and help organizations manage their access strategy and related security risk. As mentioned previously, strongly managed access privileges provided to an authenticated user offer the ability to reduce the risk exposure of the enterprise's assets by limiting the capabilities that authenticated user has. However, there are few options to control what a user can perform once privileges are provided. For example, if a user is provided write access to a file and that file is damaged, altered, or otherwise negatively impacted (either deliberately or unintentionally), the use of applied access controls will offer visibility into the transaction. The control environment can be established to log activity regarding the identification, authentication, authorization, and use of privileges on a system. This can be used to detect the occurrence of errors, the attempts to perform an unauthorized action, or to validate when provided credentials were exercised. The logging system as a detective device provides evidence of actions (both successful and unsuccessful) and tasks that were executed by authorized users.
Corrective Controls When a security incident occurs, elements within the security infrastructure may require corrective actions. Corrective controls are actions that seek to alter the security posture of an environment to correct any deficiencies and return the environment to a secure state. A security incident signals the failure of one or more directive, deterrent, preventative, or compensating controls. The detective controls may have triggered an alarm or notification, but now the corrective controls must work to stop the incident in its tracks. Corrective controls can take many forms, all depending on the particular situation at hand or the particular security failure that needs to be dealt with.
Recovery Controls Any changes to the access control environment, whether in the face of a security incident or to offer temporary compensating controls, need to be accurately reinstated and returned to normal operations. There are several situations that may affect access controls, their applicability, status, or management. Events can include system outages, attacks, project changes, technical demands, administrative gaps, and full-blown disaster situations. For example, if an application is not correctly installed or deployed, it may adversely affect controls placed on system files or even have default administrative accounts unknowingly implemented upon install. Additionally, an employee may be transferred, quit, or be on temporary leave that may affect policy requirements regarding separation of duties. An attack on systems may have resulted in the implantation of a Trojan horse program, potentially exposing private user information, such as credit card information and financial data. In all of these cases, an undesirable situation must be rectified as quickly as possible and controls returned to normal operations.
For your exam you should know below information about different security controls Deterrent Controls Deterrent Controls are intended to discourage a potential attacker. Access controls act as a deterrent to threats and attacks by the simple fact that the existence of the control is enough to keep some potential attackers from attempting to circumvent the control. This is often because the effort required to circumvent the control is far greater than the potential reward if the attacker is successful, or, conversely, the negative implications of a failed attack (or getting caught) outweigh the benefits of success. For example, by forcing the identification and authentication of a user, service, or application, and all that it implies, the potential for incidents associated with the system is significantly reduced because an attacker will fear association with the incident. If there are no controls for a given access path, the number of incidents and the potential impact become infinite. Controls inherently reduce exposure to risk by applying oversight for a process. This oversight acts as a deterrent, curbing an attacker's appetite in the face of probable repercussions.
The best example of a deterrent control is demonstrated by employees and their propensity to intentionally perform unauthorized functions, leading to unwanted events.
When users begin to understand that by authenticating into a system to perform a function, their activities are logged and monitored, and it reduces the likelihood they will attempt such an action. Many threats are based on the anonymity of the threat agent, and any potential for identification and association with their actions is avoided at all costs.
It is this fundamental reason why access controls are the key target of circumvention by attackers. Deterrents also take the form of potential punishment if users do something unauthorized. For example, if the organization policy specifies that an employee installing an unauthorized wireless access point will be fired, that will determine most employees from installing wireless access points.
Preventative Controls Preventive controls are intended to avoid an incident from occurring. Preventative access controls keep a user from performing some activity or function. Preventative controls differ from deterrent controls in that the control is not optional and cannot (easily) be bypassed. Deterrent controls work on the theory that it is easier to obey the control rather than to risk the consequences of bypassing the control. In other words, the power for action resides with the user (or the attacker). Preventative controls place the power of action with the system, obeying the control is not optional. The only way to bypass the control is to find a flaw in the control's implementation.
Compensating Controls Compensating controls are introduced when the existing capabilities of a system do not support the requirement of a policy. Compensating controls can be technical, procedural, or managerial.
Although an existing system may not support the required controls, there may exist other technology or processes that can supplement the existing environment, closing the gap in controls, meeting policy requirements, and reducing overall risk.
For example, the access control policy may state that the authentication process must be encrypted when performed over the Internet. Adjusting an application to natively support encryption for authentication purposes may be too costly. Secure Socket Layer (SSL), an encryption protocol, can be employed and layered on top of the authentication process to support the policy statement.
Other examples include a separation of duties environment, which offers the capability to isolate certain tasks to compensate for technical limitations in the system and ensure the security of transactions. In addition, management processes, such as authorization, supervision, and administration, can be used to compensate for gaps in the access control environment.
Detective Controls Detective controls warn when something has happened, and are the earliest point in the post-incident timeline. Access controls are a deterrent to threats and can be aggressively utilized to prevent harmful incidents through the application of least privilege. However, the detective nature of access controls can provide significant visibility into the access environment and help organizations manage their access strategy and related security risk.
As mentioned previously, strongly managed access privileges provided to an authenticated user offer the ability to reduce the risk exposure of the enterprise's assets by limiting the capabilities that authenticated user has. However, there are few options to control what a user can perform once privileges are provided. For example, if a user is provided write access to a file and that file is damaged, altered, or otherwise negatively impacted (either deliberately or unintentionally), the use of applied access controls will offer visibility into the transaction. The control environment can be established to log activity regarding the identification, authentication, authorization, and use of privileges on a system.
This can be used to detect the occurrence of errors, the attempts to perform an unauthorized action, or to validate when provided credentials were exercised. The logging system as a detective device provides evidence of actions (both successful and unsuccessful) and tasks that were executed by authorized users.
Corrective Controls When a security incident occurs, elements within the security infrastructure may require corrective actions. Corrective controls are actions that seek to alter the security posture of an environment to correct any deficiencies and return the environment to a secure state. A security incident signals the failure of one or more directive, deterrent, preventative, or compensating controls. The
detective controls may have triggered an alarm or notification, but now the corrective controls must
work to stop the incident in its tracks. Corrective controls can take many forms, all depending on
the particular situation at hand or the particular security failure that needs to be dealt with.
Recovery Controls
Any changes to the access control environment, whether in the face of a security incident or to
offer temporary compensating controls, need to be accurately reinstated and returned to normal
operations. There are several situations that may affect access controls, their applicability, status,
or management.
Events can include system outages, attacks, project changes, technical demands, administrative
gaps, and full-blown disaster situations. For example, if an application is not correctly installed or
deployed, it may adversely affect controls placed on system files or even have default
administrative accounts unknowingly implemented upon install.
Additionally, an employee may be transferred, quit, or be on temporary leave that may affect policy
requirements regarding separation of duties. An attack on systems may have resulted in the
implantation of a Trojan horse program, potentially exposing private user information, such as
credit card information and financial data. In all of these cases, an undesirable situation must be
rectified as quickly as possible and controls returned to normal operations.
The following answers are incorrect:
The other examples are belongs to detective control.
The following reference(s) were/was used to create this question:
CISA Review Manual 2014 Page number 44
and
Official ISC2 CISSP guide 3rd edition Page number 50 and 51

Explanation/Reference:
Explanation:
The Software Capability Maturity Model (CMM) is based on the premise that the quality of a software product is a direct function of the quality of its associated software development and maintenance processes. It introduces five maturity levels that serve as a foundation for conducting continuous process improvement and as an ordinal scale for measuring the maturity of the organization involved in the software processes.
CMM has Five Maturity Levels of Software Processes:
The initial level: processes are disorganized, even chaotic. Success is likely to depend on individual

efforts, and is not considered to be repeatable as processes would not be sufficiently defined and documented to allow them to be replicated.
The repeatable or managed level: basic project management techniques are established, and

successes could be repeated as the requisite processes would have been made established, defined, and documented.
The defined level: an organization has developed its own standard software process through greater

attention to documentation, standardization, and integration.
The quantatively managed level: an organization monitors and controls its own processes through data

collection and analysis.
The optimized level: processes are constantly being improved through monitoring feedback from

current processes and introducing innovative processes to better serve the organization's particular needs.
Incorrect Answers:
B: The Spiral model uses an iterative approach to software development with an emphasis on risk analysis. The iterative approach allows new requirements to be addressed as they are uncovered. Testing takes place early in the development project, and feedback based upon these tests is integrated into the following iteration of steps. The risk analysis ensures that all issues are actively reviewed and analyzed.
The evaluation phase allows the customer to evaluate the product in its current state and provide feedback, which is an input value for the following iteration of steps. This is a good model for complex projects that have fluid requirements.
C: The Waterfall model uses a linear-sequential life-cycle approach with each phase having to be completed in its entirety before the next phase can begin. At the end of each phase, a review takes place to make sure the project is on the correct path. In this model all requirements are gathered in the initial phase and it is difficult to integrate changes as more information becomes available or requirements change.
D: Expert systems is not a model for the development of software products. It is the use artificial intelligence (AI) to solve problems and is also called knowledge-based systems.
References:
Harris, Shon, All In One CISSP Exam Guide, 6th Edition, McGraw-Hill, New York, 2013, pp. 62, 1112,
1115-1116, 1120-1122, 1192
http://en.wikipedia.org/wiki/Capability_Maturity_Model