Online Access Free CWDP-303 Practice Test

What kind of site survey helps you identify if roaming is working as designed?

• A.Spectrum analysis walkthrough
• B.Predictive
• C.Active
• D.Passive

After deploying a 5 GHz-only WLAN infrastructure in the USA, using 20 MHz channel-widths and all 25 available channels, one of the managers of the company brings his 802.11n tablet to the office to test the Guest SSID. While testing, there were several spots where we would get poor RSSI (below -80dBM) or none at all.
You checked the WLAN infrastructure and all APs are up and running and you've validated coverage after deployment. What is causing this issue?

• A.His tablet only supports a 40 MHz channel-width
• B.His tablet doesn't support the 5 GHz band
• C.His tablet does not support one or more of the 5 GHz channels
• D.His tablet doesn't support MU-MIMO

After designing and deploying a WLAN infrastructure, you realized the CCI is causing poor performance in the 2.4 GHz band. Primarily, you've designed the WLAN for 5 GHz and 2.4 GHz as a best effort. You found out that the implementers didn't follow your guidelines when configuring the WLAN infrastructure. What can you do to minimize as much as possible the CCI impact in the 2.4 GHz band?

• A.Add more APs to the infrastructure
• B.Turn-off 2.4 GHz radios on some APs
• C.Increase the transmit power on all APs
• D.Use all channels available in the 2.4 GHz band

You are validating association capabilities from clients to an 802.1X/EAP secure SSID. The RADIUS server's IP address is 10.100.50.25 and the default RADIUS authentication port is used. When testing them, none of the clients are able to associate to the SSID. Troubleshooting the WLAN infrastructure, you found out that the server is up and the RADIUS service is up as well, but the authenticator is not able to communicate properly with the server. What's your next troubleshooting step?

• A.Restart the RADIUS service
• B.Reboot the server
• C.Verify that the shared secret between the authenticator and the RADIUS server is correct
• D.Reboot the clients

Which document provided to your customer should include all devices and parts that are going to be used during the deployment of their WLAN infrastructure?

• A.BoM
• B.Design report
• C.Project plan
• D.SoW