Free Access CWNP.CWDP-305.v2025-08-21.q200 Practice Test (Page 23)

Question 106

What are the deliverables to your customer after successfully implementing a WLAN infrastructure?

A.Project Charter

B.Nothing is required. The implemented WLAN was deliverable

C.Facility blueprints

D.Digital or physical assets, guides, floorplans and configuration documents

Question 107

Excessive uplink RTP frame retransmissions can result in ____________.

A.Deauthentication of the transmitter by the receiver

B.Lowering of the data transmission rate by the transmitting station

C.MOS scores in excess of 5

D.Head-of-Line blocking at the receiver

Question 108

What is the meaning of a Real Time FFT graph?

A.Real Time FFT means Real Time First Fundamental Trace and shows the value of the first signal detected on each frequency at each sweep interval.

B.Real Time FFT means Real Time Fast Frequency Timing and shows the RF pulses measured by the Layer 1 sweep tool.

C.Real Time FFT means Real Time Fast Fourier Transform and shows the max value of the signal detected on each frequency in real time.

D.Real Time FFT means Real Time Frequency Fundamental Texture and shows the value of the noise background generated by the card used to perform the sweep.

Question 109

In this question, you will compare the mobility processes of a network that supports WPA2-Personal and WPA2-Enterprise. Assume the use of a
15-character
ASCII passphrase for WPA2-Personal and EAP-TTLS/MSCHAPv2 with WPA2-Enterprise. Also, assume that proprietary roaming protocols are not supported.
When a device transitions from one BSS to another within the same ESS, what step must be performed in the WPA2-Enterprise transition that are not performed in the WPA2-Personal transition?

A.802.11 Reassociation

B.802.1X authentication

C.4-Way Handshake

D.Open System Authentication

Question 110

Main Topic:Infrastructure Design
Question:
When selecting a centralized WLAN architecture, what new problem may arise when you change the data forwarding model from centralized to distributed?

A.Centralized control functions, such as key management and distribution, RRM, and load balancing will no longer be supported.

B.The router between the APs and the controller must be made aware of the APs as forwarding client STAs.

C.APs that were designed for a centralized forwarding model may not support all features in distributed forwarding mode.

D.All RRM controls will also need to be distributed to a master AP that acts as a channel and transmit power arbiter for other APs in the ESS.

Other Version: 888CWNP.CWDP-305.v2026-03-09.q251

Latest Upload: 202PaloAltoNetworks.NGFW-Engineer.v2026-05-01.q43; 301Nokia.4A0-113.v2026-05-01.q69; 258EC-COUNCIL.312-49v11.v2026-04-30.q214; 229Microsoft.MB-820.v2026-04-30.q101; 212Salesforce.MC-202.v2026-04-30.q57; 206BICSI.INSTC_V8.v2026-04-29.q53; 336NMLS.MLO.v2026-04-28.q82; 244NCARB.Project-Management.v2026-04-28.q27; 465EMC.D-AV-DY-23.v2026-04-27.q184; 1120ServiceNow.CSA.v2026-04-27.q483

Question 106

Question 107

Question 108

Question 109

Question 110

Download PDF File