A.Verifying that a user is who he says he is

B.Implementing a WIPS as a full-time monitoring solution to enforce policies

C.Validating client device credentials against a database

D.Granting access to specific network services or resources according to a user profile

A.It is a 22 MHz channel so it will overlap with the channels above and below it

B.It is a channel that is unsupported by most access points

C.It is a 2.4 GHz frequency band 40 MHz channel, so it should not be used

D.It is a channel that likely requires DFS when used

A.It takes less time to create an initial site survey for a large facility when using predictive modeling software than when performing a manual survey.

B.The exact impact of interference sources from external networks can be more accurately measured when using predictive modeling software than with manual surveys.

C.Predictive modeling software makes it simple to assess multiple different AP locations and then adjust and display the AP's expected coverage pattern in almost real-time.

D.Predictive modeling software provides more reliable data than manual surveys when fine-tuning and validating access point placement after the installation.

E.Predictive modeling software can predict the ideal access point location 100% of the time, whereas the results from manual surveyingare less reliable.

A.iw phy

B.iwconfig

C.netsh wlan show device

D.ifconfig

A.WPA2-Personal uses 802.1X/EAP for authentication, and WEP-128 uses preshared keys

B.WPA2-Personal is based on IEEE 802.11 industry standards, but WEP is not

C.WPA2-Personal uses dynamic encryption keys, and WEP-128 uses static keys

D.WPA2-Personal uses CCMP for encryption, and WEP-128 uses TKIP for encryption