Online Access Free D-NWG-FN-23 Practice Test

What is the default lease time in hours for an address lease in DHCP?

• A.24
• B.36
• C.48
• D.12

What is a valid OS10 iBGP configuration?

• A.S2(config)# router bgp 64507
  S2(config-router-bgp-64507)# neighbor 192.168.32.1
  S2(config-router-bgp-64507)# remote-as 64507 S2(config-router-bgp-64507)# update-source loopback 0 S2(config-router-bgp-64507)# no shutdown
• B.S2(config)# router bgp 64507
  S2(config-router-bgp-64507)# remote-as 64507
  S2(config-router-bgp-64507)# neighbor 192.168.32.1 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown
• C.S2(config)# router bgp 64507
  S2(config-router-bgp-64507)# peer-as 64507
  S2(config-router-bgp-64507)# neighbor 192.168.32.1 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown
• D.S2(config)# router bgp 64507
  S2(config-router-bgp-64507)# neighbor 192.168.32.1
  S2(config-router-neighbor)# remote-as 64507 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown

In a PIM Sparse Mode (PIM-SM) based multicast topology, what function does the Rendezvous Point provide?

• A.The node is used to provide IGMP snooping on a layer 2 shared segment.
• B.The node is used to provide IGMP snooping across a layer 3 boundary.
• C.The root node of the source tree topology is used to provide routing between the source and receiver.
• D.The root node of the shared tree topology is used to provide routing between the source and receiver.

A network administrator enters the BGP command neighbor 10.0.2.1. The BGP router does NOT have any route to the 10.0.2.0 network. What will happen?

• A.The router will not form a successful adjacency with its 10.0.2.1 neighbor.
• B.It will send an ICMP packet to attempt to reach its 10.0.2.1 neighbor.
• C.The router will form a successful adjacency with its 10.0.2.1 neighbor. The BGP state will be listed as connect.
• D.It will send gratuitous ARP messages to attempt to discover a route to its 10.0.2.1 neighbor.

What is the default PIM-SSM IP range?

• A.232.0.0.0/8
• B.224.0.0.0/24
• C.232.0.0.0/4
• D.224.0.0.0/4