Online Access Free D-PDC-DY-23 Practice Test

What is the default transmission interval of an LLDPDU in SmartFabric OS10?

• A.30
• B.2
• C.20
• D.10

A network administrator enters the BGP command neighbor 10.0.2.1. The BGP router does NOT have any route to the 10.0.2.0 network.
What will happen?

• A.The router will form a successful adjacency with its 10.0.2.1 neighbor. The BGP state will be listed as connect.
• B.It will send an ICMP packet to attempt to reach its 10.0.2.1 neighbor.
• C.It will send gratuitous ARP messages to attempt to discover a route to its 10.0.2.1 neighbor.
• D.The router will not form a successful adjacency with its 10.0.2.1 neighbor.

The following command is issued on S1: S1(config-router-ospf-1)# redistribute static This makes the device what type of OSPF router?

• A.Designated router
• B.ABR
• C.Backbone router
• D.ASBR

How are ACLs processed?

• A.Sequentially
• B.FIFO
• C.Randomly
• D.LIFO

What is a valid OS10 iBGP configuration?

• A.S2(config)# router bgp 64507
  S2(config-router-bgp-64507)# remote-as 64507
  S2(config-router-bgp-64507)# neighbor 192.168.32.1
  S2(config-router-neighbor)# update-source loopback 0
  S2(config-router-neighbor)# no shutdown
• B.S2(config)# router bgp 64507
  S2(config-router-bgp-64507)# neighbor 192.168.32.1
  S2(config-router-neighbor)# remote-as 64507
  S2(config-router-neighbor)# update-source loopback 0
  S2(config-router-neighbor)# no shutdown
• C.S2(config)# router bgp 64507
  S2(config-router-bgp-64507)# neighbor 192.168.32.1
  S2(config-router-bgp-64507)# remote-as 64507
  S2(config-router-bgp-64507)# update-source loopback 0
  S2(config-router-bgp-64507)# no shutdown
• D.S2(config)# router bgp 64507
  S2(config-router-bgp-64507)# peer-as 64507
  S2(config-router-bgp-64507)# neighbor 192.168.32.1
  S2(config-router-neighbor)# update-source loopback 0
  S2(config-router-neighbor)# no shutdown