Online Access Free D-PE-OE-01 Practice Test

A technician needs to install several firmware updates on a server. The server cannot be rebooted until the customer performs a routine reboot.
What method should the technician use?

• A.Upload all the firmware revisions using the Lifecycle Controller and then click Install Next Reboot.
• B.Upload all the firmware revisions using the iDRAC and then select install Non-Reboot Only
• C.Compress all the firmware revisions into a zipped file then use the iDRAC to upload and select Install Next Reboot
• D.Upload all the firmware revisions using the iDRAC and then click Install Next Reboot.

After adding DIMMs on a PowerEdge R760, the server powers on, fans spin, but the system does not reach POST. The LCD shows no error. What two things should be done to resolve this Issue?

• A.Replace the system board
• B.Update the BIOS
• C.Clear SEL logs
• D.Reseat memory
• E.Verify DIMM population

A server has six memory modules attached to each CPU Memory Optimizer mode is configured. The user now wants to have maximum protection for the memory but cannot afford to lose any memory space.
What should the technician install/configure?

• A.Six additional memory modules matching the original, Switch on Single Rank Spare Mode
• B.No additional memory, Switch on Single Rank Spare Mode
• C.No additional memory, Switch to memory Mirroring
• D.Six additional memory modules matching the original, Switch to Memory Mirroring

The Dell PowerEdge R660 sei /ei is not responding during POST.
What can the system administrator do to enter BIOS progress mode?

• A.Press and hold the System ID button for more than five seconds.
• B.Enter <F2> when the server tries to POST.
• C.Press and hold the power button for 15 seconds.
• D.Disconnect and reconnect the power cables for both PSUs.

What is a key distinction between 1DRAC8 and 1DRAC9?

• A.iDRAC8 offers HTML5 based GUI
• B.iDRAC8 default credentials are customer orderable
• C.iDRAC9 default credentials are root/calvin orderable only
• D.iDRAC9 offers HTML5 based GUI