Free Access EMC.D-VXR-DY-01.v2025-03-06.q122 Practice Test (Page 19)

Question 86

What is validated by running the Proactive VM Creation test in vCenter on a VxRail cluster?

A.vSAN operates successfully

B.Network performance is sufficient

C.vSAN has sufficient storage capacity

D.Network firewalls are configured correctly

Question 87

A company has a two chassis G Series cluster and wants to change the setup. This will require a reset of the chassis.
What is the correct procedure?

A.Reset both chassis simultaneously through the reset script

B.Reset both chassis simultaneously with the mobile build server

C.Reset the secondary chassis first, followed by the primary chassis, through the reset script.

D.Reset the primary chassis first, followed by the secondary chassis, through the reset script.

Question 88

What is a requirement for Top-of-Rack (ToR) switches when deploying a VxRail cluster?

A.Must support IPv6 Multicast

B.Must be manufactured by Dell, Cisco, or Brocade

C.Must support 25GbE connectivity

D.Must have two switches in the cluster

Question 89

A company has indicated that they do not want to change the native VLAN for their entire switch.
Based on best practice, how should the Top of Rack (ToR) switch be configured?

A.Set the native VLAN only at the VxRail trunk ports

B.Do not configure ToR switch native VLAN and instead tag the VLAN on VxRail

C.The native VLAN for the switch must be set

D.Set the native VLAN on the switch ISL ports

Question 90

An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible. Use the VxRail simulator to describe why the host is Incompatible. Note: It is necessary to close (x) the simulator window before you can select a response to this question.