Online Access Free DEA-5TT1 Practice Test

Which topology is considered a best practice when stacking switches?

• A.Ring
• B.Serial
• C.Daisy-chain
• D.Cascade

An Ethernet switch receives a frame from a directly connected host. The source MAC address of the frame is not present in the MAC address table for the switch. However, the destination address is present in the MAC address table.
What does the switch do with the frame?

• A.Flushes the destination MAC address and updates the MAC address table in the switch.
• B.Adds the source MAC address and port to the MAC address table and forwards the frame.
• C.Floods the frame to all ports except for the port the frame originated from to locate the source MAC address.
• D.Discards the frame on all ports and sends an error message back to the host.

Which Ethernet frame forwarding method works best when the outbound ports run at the same speed as the inbound port?

• A.Unicast
• B.Fragment-free
• C.Store-and-forward
• D.Cut-through

What accurately describes IPv6 addressing?

• A.IPv6 uses broadcast addresses for neighbor discovery.
• B.IPv6 addresses are denoted by eight groups of four hexadecimal numbers.
• C.IPv6 uses 128 hexadecimal numbers instead of the 32 hexadecimal numbers used by IPv4.
• D.IPv6 is used to converse IP addresses and utilize private addresses.

On Switch A, a static route has been redistributed into OSPF. Which type of OSPF router will this process make Switch A?

• A.Backbone Router (BR)
• B.Autonomous System Boundary Router (ASBR)
• C.Area Border Router (ABR)
• D.Designated router (DR)