Answer see in the explanation.
Explanation/Reference:
# cd /opt/
# mkdir dir
# find / -user harry -exec cp -rfp {} /opt/dir/ \;

vi /etc/sysconfig/network GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0 DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
service network restart
Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254.

rpm -ivh ftp://server1/example.com/pub/updates/zsh-*
or
Login to ftp server : ftp ftp://server1.example.com using anonymous user.
Change the directory: cd pub and cd updates
Download the package: mget zsh-*
Quit from the ftp prompt : bye
Install the package
rpm -ivh zsh-*
Verify either package is installed or not : rpm -q zsh

Answer see in the explanation.
Explanation/Reference:
# useradd -u 1234 alex
# passwd alex
alex111
alex111
OR
echo alex111|passwd -stdin alex

1. Use fdisk /dev/hda-> To create new partition.
2. Type n ->For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Keys
5. Type the size: +100M you can specify either Last cylinder of size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
OR
1. mke2fs -j /dev/hda? ->To create ext3 filesystem.
2. vi /etc/fstab
3. Write:
/dev/hda? /data ext3 defaults 0 0
4. Verify by mounting on current sessions also:
mount /dev/hda? /data