* [root@node1 ~]# nmcli connection show
[root@node1 ~]# nmcli connection add con-name static ifname enp1s0 type ethernet ipv4.addresses 172.25.15.10/24 ipv4.gateway 172.25.15.2 ipv4.dns 172.25.15.2
[root@node1 ~]# nmcli connection modify static ipv4.method manual connection.autoconnect yes
[root@node1 ~]# nmcli connection modify static +ipv4.addresses 10.0.0.5/24
[root@node1 ~]# nmcli connection up static
[root@node1 ~]# nmcli connection show
[root@node1 ~]# hostnamectl set-hostname node1.domain15.example.com
[root@node1 ~]# hostnamectl status
[root@node1 ~]# nmcli connection down static
* [root@node1 ~]# nmcli connection up static
[root@node1 ~]# ip addr show
[root@node1 ~]# reboot
### For checking ###
[root@node1 ~]# ip addr show
[root@node1 ~]# netstat -nr
[root@node1 ~]# cat /etc/resolv.conf

lvextend -L+200M /dev/test0/testvolume1 Use lvdisplay /dev/test0/testvolume1) ext2online -d /dev/test0/testvolume1 lvextend command is used the increase the size of Logical Volume. Other command lvresize command also here to resize. And to bring increased size on online we use the ext2online command.

# cat /etc/testfile | while read line;
do
echo $line | grep abcde | tee -a /tmp/testfile
done
OR
grep `abcde' /etc/testfile > /tmp/testfile

useradd -u 3400 iar
passwd iar

see explanation below.
Explanation
nameserver is specified in question,
1. Vi /etc/resolv.conf
nameserver 192.168.0.254
2. host server1.example.com