Free Access H3C.GB0-191-ENU.v2022-04-13.q162 Practice Test (Page 32)

Question 151

The following statement about WAN is wrong. ______.

A.The HDLC protocol can be encapsulated on the synchronous link or on the asynchronous link. Only supports synchronization

B.The HDLC protocol only supports point-to-point links, not point-to-multipoint links.

C.When the CE1/PRI interface uses the CE1/PRI working mode, it is physically divided into 32 time slots, the corresponding numbers are 0~31, of which time slot 0 is used to transmit synchronization information.

D.When the CE1/PRI interface uses E1 working mode, it is equivalent to an interface with no time slot division and a data bandwidth of 2Mbps. Its characteristics are the same as the synchronous serial port, supporting PPP, frame relay, LAPB and X.25 And other data link layer protocols, supporting network protocols such as IP and IPX.

Question 152

The two WAN interfaces S1/0 and S1/1 of the router MSR-1 are connected to the routers MSR-2 and MSR-3 respectively.
At the same time, the Ethernet port of MSR-1 is connected to MSR-4. All four routers have run the RIP protocol and completed routing learning correctly. All routers have started all the features of RIP to prevent loops. At this time, it is found that the MSR -2 The network 192.168.0.0 fails, then ______ after a certain period of time. (Multiple choice)

A.If the network 192.168.0.0 returns to normal, MSR-2 will immediately send routing update information

B.The cost of 192.168.0.0 routing items on all routers is set to the maximum value

C.If the network 192.168.0.0 returns to normal, MSR-2 will wait until the update cycle time point to send update information to other routers

D.The 192.168.0.0 routing entries on all routers will enter the suppressed state

Question 153

Xiao L is a senior network technical engineer. He wants to design a relatively perfect IGP routing protocol independently. He hopes that the routing protocol has a great improvement in Cost. Then, when designing the cost of the routing protocol, which of the following factors should be considered? (Multiple choice)

A.Link MTU

B.Link reliability

C.Link delay

D.Link bandwidth

Question 154

As shown in the figure, S3610 switch SWA uses ports E1/0/1 and E1/0/2 to connect to another switch SWB. In order to increase bandwidth, static link aggregation needs to be configured on the switch.
Which of the following configuration is correct? (multiple choice)

A.[SWA-Ethernet1/0/2] interface bridge-aggregation 1

B.[SWA] interface bridge-aggregation 1

C.[SWA-Ethernet1/0/1] port link-aggregation group 1

D.[SWA]interface bridge-aggregation 1 port Ethernet1/0/1 Ethernet1/0/2

Question 155

If you want to set the frame relay LMI type to ANSI, you should ______.

A.Use the command fr lmi class ansi in interface mode

B.Use the command fr lmi type ansi in interface mode

C.Use the command fr lmi class ansi in system mode

D.Use the command fr lmi type ansi in system mode

Other Version: 2022H3C.GB0-191-ENU.v2023-08-09.q120; 3718H3C.GB0-191-ENU.v2022-06-08.q137; 65H3C.Braindumpspass.GB0-191-ENU.v2021-10-10.by.armstrong.153q.pdf

Latest Upload: 105OCEG.GRCP.v2025-09-11.q211; 104HP.HPE0-V27.v2025-09-11.q78; 119Oracle.1Z0-1057-23.v2025-09-10.q47; 153Google.Professional-Cloud-Network-Engineer.v2025-09-09.q179; 131SAP.C-S4EWM-2023.v2025-09-08.q83; 166TheSecOpsGroup.CNSP.v2025-09-08.q20; 229CFAInstitute.ESG-Investing.v2025-09-08.q173; 176PECB.ISO-IEC-27001-Lead-Implementer.v2025-09-06.q132; 152Salesforce.Data-Architect.v2025-09-05.q216; 148Adobe.AD0-E605.v2025-09-05.q50

Question 151

Question 152

Question 153

Question 154

Question 155

Download PDF File