Free Access H3C.GB0-191-ENU.v2022-06-08.q137 Practice Test (Page 22)

Question 101

As shown in the figure, there are 4 ways to divide the OSPF area, which one is correct? (multiple choice)

A.Picture 2

B.Picture 1

C.Figure 3

D.Figure 4

Question 102

The two empty-configured MSR routers are connected as shown in the figure. By configuring the IP address, the GE0/0 interfaces of the two routers can communicate with each other.

Now the following configurations are added to the two routers respectively:
RTA:
[RTA]ospf
[RTA-ospf-1]area 0
[RTA-ospf-1-area-0.0.0.0]network 192.168.1.1 0.0.0.3
[RTA-GigabitEthernet0/0]ospf dr-priority 2
RTB:
[RTB]ospf [RTB-ospf-1]area 0
[RTB-ospf-1-area-0.0.0.0]network 192.168.1.1 0.0.0.3
[RTB-GigabitEthernet0/0]ospf dr-priority
Then after the OSPF neighbor status is stable, ______.

A.The neighbor status of the two routers are FULL and 2-Way respectively

B.OSPF interfaces have the same priority, and no OSPF DR election is performed on the 192.168.1.0/30 network segment

C.Of the two routers, one is DR and the other is BDR

D.Of the two routers, one is DR and the other is DRother

Question 103

Which part of the subnet division technology is implemented on the basis of the natural classification of IP address division?

A.host number part

B.Network number part

C.Subnet number part

D.prefix part

Question 104

The correct statement below is ______. (Multiple choice)

A.DTE (Data Terminal Equipment, data terminal equipment) equipment refers to the equipment located at the user end of the user network interface, it can be used as a source, a sink, or both at the same time. Data terminal equipment is connected to a data network through a data communication device (for example, a modem), and usually uses a clock signal generated by the data communication device. Modems and interface cards are examples of DTE devices. Is an example of a DCE device

B.CSU (Channel Service Unit): A digital interface device that connects end users with the local digital telephone loop. Usually it and DSU are collectively referred to as CSU/DSU. CSU equipment includes computers, protocol translators, and demultiplexers. DTE equipment includes these

C.DSU (Data Service Unit): refers to a device used in digital transmission, which can adapt the physical layer interface on the DTE device to communication facilities such as T1 or E1. The data service unit is also responsible for signal timing and other functions. It is usually mentioned together with CSU and is called CSU/DSU.

D.DCE (Data Circuit Terminating Equipment, data communication equipment or data circuit terminal equipment) equipment and its connection with the communication network constitute the user network interface of the network terminal. It provides a physical connection to the network for forwarding traffic, and provides a clock signal for synchronizing data transmission between DCE equipment and DTE equipment.

Question 105

After turning on the debugging, you can use the ______ command to turn off the debugging.

A.no debugging all

B.undo terminal monitor

C.undo terminal debugging

D.undo debugging all

Other Version: 2022H3C.GB0-191-ENU.v2023-08-09.q120; 4148H3C.GB0-191-ENU.v2022-04-13.q162; 65H3C.Braindumpspass.GB0-191-ENU.v2021-10-10.by.armstrong.153q.pdf

Latest Upload: 105OCEG.GRCP.v2025-09-11.q211; 104HP.HPE0-V27.v2025-09-11.q78; 118Oracle.1Z0-1057-23.v2025-09-10.q47; 151Google.Professional-Cloud-Network-Engineer.v2025-09-09.q179; 131SAP.C-S4EWM-2023.v2025-09-08.q83; 165TheSecOpsGroup.CNSP.v2025-09-08.q20; 223CFAInstitute.ESG-Investing.v2025-09-08.q173; 173PECB.ISO-IEC-27001-Lead-Implementer.v2025-09-06.q132; 151Salesforce.Data-Architect.v2025-09-05.q216; 147Adobe.AD0-E605.v2025-09-05.q50

Question 101

Question 102

Question 103

Question 104

Question 105

Download PDF File