Online Access Free GB0-342-ENU Practice Test

When the WLAN is combined with the operator's indoor distributed system, the FAT AP must be used instead of the FIT AP. The above statement is

• A.correct
• B.error

Wireless Controller Supports Stacked Devices (Multiple Choice)
The networking of IRF is created to meet the market demands of high reliability and high performance. Currently, only mid-to-high-end wireless controller products support IRF features.
Among the newly developed products of V7, the supported products include WX3500H series, WX5500H series, WBC series and wireless controller card series supporting IRF feature;
In products upgraded from V5 to V7, only WX5500E series and wireless card series support IRF feature.

• A.Boxed devices are stacked across devices
• B.Cassette devices are directly connected for stacking
• C.stacking devices in the same frame
• D.Cross-frame device stacking

WLAN combining system design methods include:

• A.For the distributed deployment design with the same environment layout on each floor, a uniform and symmetrical antenna-feeder design can be selected, such as the combining position of each floor, the number of APs, the number of couplers and power dividers, and the device specifications. Unite
• B.There are two ways to expand the capacity of the combiner system. One is to modify the antenna at the end of the system, insert a combiner to add APs; the other is to use a dedicated WLAN dual AP combiner.
• C.Under normal circumstances, there should not be more than one WLAN signal on the main channel of the combined system, which will cause mutual interference of WLAN signals and cannot be demodulated
• D.When adding AP combining points on the original room distribution system, if there is a power amplifier device in the original system, the AP point combining position is selected behind the power amplifier device.

During the implementation of the WLAN project, in order to avoid the wired access switch from being struck by lightning, it is necessary to adopt the

• A.AP side network port lightning protection unit
• B.AP and wired network are connected by fiber
• C.Ethernet port SPD
• D.Antenna Lightning Arrester

The following wireless controllers that support NAS storage are

• A.MSG360-10-PWR
• B.WAC380-90
• C.MSG360-20N
• D.WACaa0-120