Free Access H3C.GB0-371-ENU.v2022-04-18.q117 Practice Test (Page 15)

Question 66

The host PCA, PCB and PCC are respectively connected to the GigabitEthernet1/0/1 GigabitEthernet1/0/2 and GigabitEthernet1/0/3 ports of the switch SWA belong to VLAN2, VLAN3 and VLAN10, and the host ife addresses are in the same network segment. PCA Both PCC and PCB can access PCC, but PCA and PCB cannot communicate with each other. In the configuration process of SWA, which of the following configurations should be included?

A.[SWA]vlan10 [SWA-vlan 10]isolate-user-vlan enable

B.[SWA]vlan3 [SWA-vlan3]port GigabitEthernet 1/0/2

C.[SWA]isolate-user-vlan 10 secondary 2 3 [SWA]vian10 [SWA-vlan 10]port GigabitEthernet 1/0/3

D.[SWA]vlan2 [SWA-vlan2]port GigabitEthernet 1/0/1

Question 67

In the switching network as shown in the figure, VLAN10 is set as Super VLAN on the switch SWA, VLAN2 and VLAN3 are Sub VLANs of VLAN10, port Ethernet1/0/3 is Trunk port, PVID is VLAN1, allowing all VLANs to pass through; Create VLAN2~VLAN20 on SWB, port Ethernet1/0/4 as Trunk port, PVID is VLAN1, allowing all VLANs to be judged by setting the IP address of each device as shown in the figure (choose one or more)

A.SWB can communicate with PCB

B.None of the above answers

C.SWB can communicate with SWA

D.SWB can communicate with PCA

E.SWB can communicate with PCC

Question 68

What is the correct statement about the MSTP calculation process?

A.After the MSTI calculation is completed, the same physical port may have different roles in different instances

B.The mapping relationship between VLANs and instances in different MST regions is independent and can be different or the same

C.Root bridge of MSTI The root bridge of IST can be the same switch

D.After the MSTI calculation is completed, the data flow between the domain and the domain must pass through the Master port

Question 69

The switch SWA and SWB are connected together by two optical fiber Gigabit Ethernet links. The switch SWA has the following interface configuration:
[SWA]interface GigabitEthernet 1/0/1
[SWA-GigabitEthernet1/0/1]gvrp
[SWA-GigabitEthernet1/0/1]port link-type trunk
[SWA-GigabitEthernet1/0/1]port trunk permit vlan 1 10
[SWA]interface GigabitEthernet 1/0/2
[SWA-GigabitEthernet1/0/2]port link-type trunk
[SWA-GigabitEthernet1/0/2]port trunk permit vlan 1 10
It can be seen from the above

A.Only by changing the configuration of GigabitEthe1/0/2 to be consistent with GigabitEthe1/0/1, can they join the same aggregation group

B.If MSTP is enabled on the SWA switch, GigabitEthe1/0/1 and GigabitEthe1/0/2 can participate in forwarding

C.GigabitEthernet1/0/1 and GigabitEthe1/0/2 cannot join the same aggregation group

D.If SWA4 is switched to enable MSTP, one of GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 will be blocked

Question 70

If customers prefer to use TACACS+ protocol instead of RADUS to complete user access authentication, this may be because

A.TACACS+ protocol uses TCP reliable transmission

B.The TACACS+ protocol message is simple, which can be combined with authentication and authorization, or separated easily

C.TACACS+ protocol encrypts all the body of the message with high security

D.TACACS+ adopts UDP protocol, high network transmission efficiency

Other Version: 2762H3C.GB0-371-ENU.v2022-08-24.q110

Latest Upload: 105OCEG.GRCP.v2025-09-11.q211; 104HP.HPE0-V27.v2025-09-11.q78; 118Oracle.1Z0-1057-23.v2025-09-10.q47; 151Google.Professional-Cloud-Network-Engineer.v2025-09-09.q179; 131SAP.C-S4EWM-2023.v2025-09-08.q83; 165TheSecOpsGroup.CNSP.v2025-09-08.q20; 223CFAInstitute.ESG-Investing.v2025-09-08.q173; 173PECB.ISO-IEC-27001-Lead-Implementer.v2025-09-06.q132; 151Salesforce.Data-Architect.v2025-09-05.q216; 147Adobe.AD0-E605.v2025-09-05.q50

Question 66

Question 67

Question 68

Question 69

Question 70

Download PDF File