A.The virtual machine can directly access physical storage mounts through the network

B.The virtual machine can mount the storage volume on the CVK as a block device

C.You can create a new file in the CVK mounted storage pool and mount it to the virtual machine for use

D.Multiple virtual machines can mount the same disk file

A.The physical switch VLAN and other information are configured incorrectly

B.Virtual switch forwarding abnormality

C.Virtual machine network policy template configuration error

D.The virtual machine operating system firewall blocks the message sending and receiving, resulting in abnormal message sending and receiving

A.During the normal operation of the virtual machine, if the storage pool where the image file is located is full, the virtual machine will become suspended

B.When the virtual machine is working normally, performing a power off operation may cause the virtual machine operating system and application data to be lost, so it should be used with caution.

C.After a virtual machine is moved to the recycle bin, it can be manually restored within the storage period. If the storage period exceeds the limit, it will be automatically deleted.

D.The virtual machine does not have CAS Tools installed, and the virtual machine may not be shut down when the shutdown operation is performed.

A.The deployed virtual machine needs to be added to the AD domain, so the operating system information needs to be configured using the full initialization method.

B.When using the quick initialization method to configure the operating system information, the CAS Tools tool must be installed in the virtual machine template.

C.The deployed virtual machine needs to be added to the AD domain, so the operating system information needs to be configured using the quick initialization method

D.When using the full initialization method to configure the operating system information, it is required that the CAS Tools tool is installed in the virtual machine template.

A.If the host has two HBA ports, the storage side has two controllers, and each controller has two HBA ports, then the host side can discover a total of 4 storage paths

B.Multipathing can be implemented in two modes: Active-Active mode and Active-Passive mode.

C.The main function of multipath is to improve reliability and achieve load balancing, but it cannot increase link bandwidth.

D.If there is no multipath software, one LUN will be recognized as multiple LUNs on the host side.