A.Sequence Control Bit

B.Duration

C.FCS

D.Frame Control

A.AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] wpa2 authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy wpa2 [AC-WLAN-sec-prof-security-1] quit

B.AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] wep authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy wep [AC-WLAN-sec-prof-security-1] quit

C.AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] wpa authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy wpa [AC-WLAN-sec-prof-security-1] quit

D.AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] open authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy open [AC-WLAN-sec-prof-security-1] quit

A.can configure the forwarding mode as direct-forward or tunnel-forward.

B.The SSID string can be configured via ssid xxxx

C.can configure service-vlan

D.can bind a security template

A.Vertical

B.45

C.Parallel

D.60

A.The configuration whitelist can be authenticated based on the MAC or authenticated based on the SN.

B.By configuring the AP in the offline state, authentication is required to automatically access the AP.

C.By default, the access control mode of the AP to the AC is not authenticated.

D.If the AP access control adopts MAC authentication, the AP outside the MAC authentication list can also be online after being manually confirmed.