A.WRED can set different drop thresholds and packet loss rates for packets of different priority

B.Avoid global synchronization by selectively dropping multiple TCP streams

C.When the flow exceeds the minimum threshold, WRED begins to discard all inlet flow (tail drop)

D.Low-bandwidth traffic is easier to drop than high-bandwidth traffic

A.BD

B.VBDIF

C.VLANIF

D.VTEP

A.8023af

B.8021D

C.8021U

D.8023

E.8023Z

A.The IP address of the C-RP interface Number of

B.The mask length of the group range for the C-RP service that matches the group address that the user joined

C.C-RP priority

D.C-RP interface

A.Only if the configuration of GigabitEthernet 1/0/2 is changed to match GigabitEthernet 1/0/1 can the two join the same aggregation group

B.Because of the different VLANs allowed, GigabitEthernet1/0/1 and GigabitEthernet1/0/2 cannot join the same aggregation group

C.Without changing the current configuration, GigabitEthernet1/0/1 and GigabitEthernet1/0/2 can join the same aggregation group

D.After link clustering is configured on both SWA and SWB, if MSTP is enabled on the switches SWA and SWB Both GigabitEthernetl1/0/1 and GigabitEthernetl/O/2 are the forwarding status of MSTP