Free Access Huawei.H31-341.v2022-05-18.q167 Practice Test (Page 21)

Question 96

A, C are the WDM OTM stations, and B is the relay station.
When the transmission direction of the A to B stations is interrupted, the Wavelength side of the B-stack OTU relay board reports the R_LOS emergency alarm and runs the processing to the upstream A.
The station side OTU2_BDI secondary alarm. At the same time, the alarm continues to be transmitted to the downstream station of the B station. After the alarm is processed at the C site, the ODU2_PM_AIS minor alarm is reported on the WDM side of the C-site OTU, and the ODU2_PM_BDI secondary alarm is transmitted back to the upstream station A.

A.FALSE

B.TRUE

Question 97

NS4 as 100G line service processing board. In the following description of the NS4 board, which is wrong?

A.It can be used in electrical relay stations to realize the electrical relay function of the corresponding optical signals.

B.The wavelength of the wavelength division side optical signal is adjustable within 80 waves of the C-band 50 GHz interval.

C.Support 80-way ODU0/ODUflex or 40-way ODU1 or 10-way ODU2/ODU2e or 2-way ODU3 or 1-way ODU4 signal and cross-board to realize service cross-scheduling.

D.The MS4 board does not support the intersection of ODUI services with the ND2 board through the centralized crossover bus.

Question 98

Which of the following statement is correct?

A.Deactivation will delete the configuration of the U2000, which has no impact on the device side services.

B.The optical layer path must be deleted first when the electrical layer path is removed.

C.When the OCh path exists, you can directly create a client path. The NMS automatically creates an ODUk path.

D.The optical layer path and the electrical layer path are independent. It is not necessary to delete the electrical layer path when deleting the optical layer path.

Question 99

When the standard Ethernet frame whose length is 64 Bytes is accessed to the Ethernet board, if the QinQ function is enabled, what is the actual frame length of the signal in the board? ( )

A.84 Bytes

B.68 Bytes

C.80 Bytes

D.64 Bytes

Question 100

Using the path method to create a Client path fails. What are the possible reasons? (Multiple choice)

A.Physical connection lacking between boards

B.There is no complete OCh path

C.The channel has been used up

D.FEC mode does not match at both ends of the transceiver

Other Version: 3136Huawei.H31-341.v2022-08-22.q153; 61Huawei.Examcollectionpass.H31-341.v2021-11-14.by.ivy.87q.pdf

Latest Upload: 111Oracle.1z0-1196-25.v2025-09-12.q18; 110NetworkAppliance.NS0-162.v2025-09-12.q86; 193OCEG.GRCP.v2025-09-11.q211; 111HP.HPE0-V27.v2025-09-11.q78; 126Oracle.1Z0-1057-23.v2025-09-10.q47; 169Google.Professional-Cloud-Network-Engineer.v2025-09-09.q179; 141SAP.C-S4EWM-2023.v2025-09-08.q83; 205TheSecOpsGroup.CNSP.v2025-09-08.q20; 322CFAInstitute.ESG-Investing.v2025-09-08.q173; 281PECB.ISO-IEC-27001-Lead-Implementer.v2025-09-06.q132

Question 96

Question 97

Question 98

Question 99

Question 100

Download PDF File