Online Access Free H35-211-ENU Practice Test

RADIUS packets cannot be transmitted to the RADIUS server. Which of the following is not a possible cause?

• A.The communication line with the RADIUS server is faulty
• B.NAS address setting is incorrect on Radius server
• C.The password entered by the client is incorrect
• D.Incorrect port settings for authentication and accounting

Which of the following is incorrect about T.38 protocol?

• A.T.38 is a supplementary protocol to T.30 for IP adaptation. The main T.30 is encapsulated to accommodate IP fax.
• B.T.38 redundancy mechanism according to the T.38 protocol ensures the quality of service.
• C.T.38 protocol: The signaling part adopts the High-Level Data Link Control (HDLC) format, the second channel of V.21 300 bps modulated signal; the data transmission will use the modulation protocol negotiated by the fax terminal.
• D.T.38 does not have an independent fax status and is completely dependent on the fax mechanism of T.30.

A total of 100 multicast users on the MA5600 are watching 20 multicast programs. If each multicast program occupies a bandwidth of 2M bit/s, how much multicast traffic does the MA5600 uplink port have?

• A.200M bit/s
• B.100M bit/s
• C.50M bit/s
• D.90M bit/s

If multicast services are only deployed in private private networks, which multicast address segment should be preferred when planning?

• A.225.0.0.0/8
• B.232.0.0.0/8
• C.239.0.0.0/8
• D.224.0.0.0/8

Packet voice processing board PVM, manage and control the narrowband user board in the UA5000 chassis. Which of the following is wrong?

• A.Support TDM voice encapsulation into ATM cell uplink to softswitch equipment
• B.Support TDM voice encapsulation into IP packets uplink to softswitch equipment
• C.Implement V5 protocol and H.248/MGCP protocol processing
• D.Support TDM voice signal uplink to the switch through the V5 interface