Online Access Free HP0-Y43 Practice Test

Which type of IPv6 over IPv4 tunnel protocol on an HP 12500 switch requires that you specify a destination?

• A.IPv6 over IPv4 auto (or IPv4-compatible)
• B.ISATAP
• C.IPv6 over IPv4
• D.6 to 4

What is the first step a network administrator should complete to configure the first remote mirroring session between an HP 5400 zl and an HP 8200 zl switch?

• A.Add VLANs or ports to the remote mirror session
• B.Configure the remote mirror session on the destination switch
• C.Configure the remote mirror session on the source switch
• D.Configure a GRE tunnel between the source and destination switch

View the exhibit.

A host connected to routing switch A joins group 239.0.0.1. Which switch does routing switch A select as the RP?

• A.Routing switch C
• B.Itself
• C.Routing switch D
• D.Routing switch B

Which switch is best suited to act at the edge of a medium to large HP FlexFabric solution?

• A.9500
• B.5500
• C.10500
• D.5830

A network includes a mix of IGMPv2 and IGMPv3 endpoints and must support the following source specific multicasting applications: -Source: 10.1.4.2 and Group: 232.0.5.5 -Source: 10.1.4.12 and Group 232.0.6.6 The network is already implementing PIM-SM and IGMPv3. In order to support these applications, the HP 10500 switches that act as routers for the endpoints in question must support another feature. Which step must the network administrator perform on each of these switches?

• A.Configure two SSM maps, each of which maps a source to its multicast group
• B.Enable IGMPv2 backward compatibility mode
• C.Create an SSM policy that includes 232.0.5.5 and 232.0.6.6 within its range
• D.Enable PIM SSM on the interfaces that connect to the endpoints